Universal chucks and acc.

Flange for universal chuck ITEM for lathe MN 80 Designed for universal chucks of the ITEM series 125mm from our offer Diameter Screws: 125mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 125mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 80mm Material: Steel Thread: M 39A — 4

Pliers holder type 5C for spindle of lathe SV-18 with taper metr.50 Outer taper: metr.50 Inner taper: 10Â ° Rear cylinder bore diameter 38.0mm Overall housing length: 85mm Material: tool steel Collets 5C can be purchased from us separately in pieces in the design: * Round * Four edges * Hexagon - see related products

Pliers holder E21SN 242145 size 25 for spindle lathe SV-18 with taper metr.50 Outer taper: metr.50 Inside Cone: 15 ° 15 ° Rear cylinder bore diameter 38.2mm Total case length: 85mm Material: tool Steel

Socket Chassis Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 160mm Flange Diameter: 160mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Chainsaws: IUS 200mm Flange Diameter: 200mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Socket Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 250mm Diameter flange: 250mm Material: Gray cast iron Clamping threads: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Support flange for SV-18 and TOS S-28 lathe Flange diameter: 200mm Material: gray cast iron Â!Vit: M68x6 The flange has a groove for securing with a pin when turning between the points.

ČSN 24 3831 Cat. number: 243831.253300

Threaded adapter / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M33(M33x3, 5) Inner thread: 1 "x 8 feet per inch( = 25,4mm x 8 feet per inch) Total length: 29,5mm Reduction body diameter: 48mm This adapter is suitable for a chuck - see related products.

Threaded adapter / adapter for use with wood lathe chuck with a diameter of 100mm Outer thread: M33(M33x3, 5) Inner thread: 3/4 "x 16 feet per inch( = 19.05mm x 16 feet per inch) Total length: 46mm Reduction body diameter: 48mm This adapter is suitable for a chuck - see related products.