Auto - moto
-
Cleaning preparations
-
Jacks, mounting stands
-
Pullers
-
Roller honing preparations
-
Beading sets, body accessories
-
Profile and tube benders
-
Measuring aids
-
Chain riveters
-
Liquid change
-
Pliers, wrenches, heads
-
Anti-corrosion agents
-
Milling cutters for valve seats
-
Universal bending machine OH 010
Used to bend materials of flat, square and circular cross-sections and thick-walled heating pipes. Max. Material dimensions Round timber: 16mm Concrete steel: 14mm Square steel: 16x16mm Steel strip - radius bend: 10x50mm Steel strip - sharp bend: 6x50mm < br> Scope of delivery: 24, 30, 37, 43, 49, 62 and 75 mm O 24 , 30, 37, 43, 49, 62 and 75 mm Provides a truly economic way of bending common shapes and bends. The bending head with the lever is detachable and easy to carry; with a clamping pad (Order No. 1010 250.W) can be clamped to a vice in various workplaces, service wagons, etc. Can bend simple and complex shapes, bends up to 180 °, various closed shapes - all Cold. An angular stop is used to ensure precision in series production. In combination with the shaping tool, the bending machine enables the production of decorative grilles, garden furniture or decorative elements in interiors and exteriors. Extension lever for greater bending power. Rigid stand with base for machine anchoring.
On request481,27 € with VAT -
Transverse rollers for OH 010 bending machine - set 010-180
They are used for bending flat steel strip with a width of up to 50 mm and a thickness of 7 mm and for the bending of square steel up to 16 × 16 mm with a bending cross. This set is designed for artistic locksmith work but is also suitable for common locksmith work. The set consists of eight rollers. Extends the bending capabilities of the following diameters: - pr. 110, 150, 175 and 200 mm.
On request253,06 € with VAT -
Clamping washer for OH 010 and OH 030 bending machine
Attaches the disassembled splitting head assembly in a vice. Washer allows portable use of the bending machine without being forced to dismantle and carry the stand. It is also used as a special accessory for the OH 030 thin-walled bender. The vice is not included - it's just a washer!
On request26,83 € with VAT -
Forming tool for spirals TP 011
Bending material for spiral. The spiral molding tool TP 011 makes it possible to produce bending shapes on a strip, log, and square of a material suitable for forming (annealed) in a very simple way. The product is intended for use on profile bender 010 and bending pipe for heating pipes 012 - see related products. Only a shaping tool, not a bender of profiles 010 or 012, is included. Max. Material dimensions Round timber: 5mm Square: 5x5mm Steel strip - radius bend: 5x25mm
On request86,16 € with VAT -
Heating pipe bender OH 012
Economical and efficient bending of heating and plumbing tubes up to G 3/4 ". Internal bend diameter: G 3/8 ": 102 mm G 1/2": 108 mm G 3/4 ": 112 mm Enables bending up to 180 ° incl. benders All bends made cold Bending blade fixed with clamping pad to vice or mounted on mounting table Same bending angle is reinserted by adjustable stop | Easy and quick tool change Simple operation The vise is not included.
On request405,19 € with VAT -
OH 030 thin-walled pipe bender
It is designed for bending of pipes made of steel, brass, copper and other materials. It provides a truly economical way of bending thin-walled tubes without filling the tube, heating it, or inserting the auxiliary mandrel. Max. wall thickness - steel: 2 mm Inner Home bending radius: 4 times the pipe diameter bender bending head, together with the lever and bending segments in combination with a clamping washer is easily movable, it can be used at different sites in the service wagons after clamping in a vice. Its design is ideal for various locksmithing professions, hydraulic installation fitters, plumbers, furniture makers etc. Bending possible in all planes, ie, eg 3D, 2.5D etc., also for bending of square cross-sections up to 20 × 20 × 2 mm -
On request1.013,74 € with VAT -
Set OH 031 - extension for bending machine OH 010
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - Thin-walled tubes using one rack Installation is done by replacing the bending heads on the 010 rack 030 Can be used also on electric bender model 060 Technical data: Max. wall thickness - steel: 2mm Internal bending radius: 4 x pipe diameter
On request658,76 € with VAT -
OH 040 combi pipe bender
Excellent helper when bending pipes from bricked steel, brass and copper materials. Max. wall thickness - steel: 2mm Max. wall thickness - other materials: 1,5mm Max. bending angle: 180 ° Roller set in diameters 5 - 6, 8, 10, 12 mm - > Clamping can be directly on the worktop by means of a built-in clamp or clamping into the claws of a vice • Contains a set of 4 pieces of interchangeable pulleys around which the bending of the pipes is performed by the lever • The reverse part of the lever serves as the key to release the pulley when it is exchanged for another Allows also the clamping of the material when it is cut to the required length, thus replacing the vice Bending is possible up to 180 ° in all the planes, ie the space It is suitable for installation workers during assembly hydraulic distributors, plumbers, car mechanics, locksmiths, etc.
On request161,78 € with VAT