Homepage Air tools and accessories

Air tools and accessories

Product count: 434
  • Pneumatic tapping head with adjustable arm, VAT-700 series

    Pneumatic tapping head with adjustable arm, VAT-700 series

    Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmax 700mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

    from 1.617,23 € with VAT
  • Pneumatic tapping head with adjustable arm, VAT-1400 series

    Pneumatic tapping head with adjustable arm, VAT-1400 series

    Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1400mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

    from 1.740,36 € with VAT
  • Pneumatic tapping head with adjustable arm, VAT-1600 series

    Pneumatic tapping head with adjustable arm, VAT-1600 series

    Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

    from 1.485,37 € with VAT
  • Pneumatic tapping head with adjustable arm, VAT-1900 series

    Pneumatic tapping head with adjustable arm, VAT-1900 series

    Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

    from 1.617,62 € with VAT
  • Pneumatic tapping head VAT-SP, VERTEX

    Pneumatic tapping head VAT-SP, VERTEX

    Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products

    from 494,06 € with VAT
  • Angle head for pneumatic taps , AT-90°

    Angle head for pneumatic taps , AT-90°

    Adjustable swivel angle head For pneumatic taps: according to the selected variant Inclination: 90 °

    from 268,45 € with VAT
  • Pneumatic pistol on an Aircraft cartridge

    Pneumatic pistol on an Aircraft cartridge

    Cartridge Explosion-Proof Dimensions (W × H × D): 360 × 160 × 60 mm Weight: 0.46 kg

    In stock
    61,18 € with VAT
  • Calibrated 10 Bar tire inflator with rubber hose and quick coupling, Aircraft

    Calibrated 10 Bar tire inflator with rubber hose and quick coupling, Aircraft

    Tire inflation pressure gauge with pressure gauge, calibrated pressure gauge Test gauge has been performed, filler has a seal. A 63mm diameter alarm clock is fitted with a rubber casing Clearly arranged Bar and PSI Max. Measuring up to 10 Bar and 140 PSI Max. Pressure: 12 Bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold

    In stock
    45,87 € with VAT
  • Sandblasting gun with 1l container, 4-8 bar, Aircraft

    Sandblasting gun with 1l container, 4-8 bar, Aircraft

    Special hardened nozzle with automatic material suction Container volume 1 liter Working pressure: 4-8bar Air consumption: 250-300l / min To remove rust and residue in hard-to-reach places . Hard Steel Nozzle 6mm Recommended grain size of abrasive is 0.8mm

    In stock
    30,56 € with VAT
  • Sandblasting gun with hose 4-8 bar, Aircraft

    Sandblasting gun with hose 4-8 bar, Aircraft

    Thick nozzle, material pick-up from a separate container Working pressure 4-8bar Air consumption: 250-400l / min To remove rust and residue in hard-to-reach places. The abrasive material is sucked from an external hose tank over 2m long. Hardened steel nozzle 6mm. The recommended grain size of the abrasive is 0.8mm

    In stock
    30,56 € with VAT
  • Sandblasting gun with hose SPS PRO, Aircraft

    Sandblasting gun with hose SPS PRO, Aircraft

    For grinding material up to 0.8 mm Length of suction hose 1700 mm, d = 18/24 mm Hardened steel nozzle 6.0 mm Working pressure: 5-8bar Air consumption : 320-420l / min To remove rust and residue in a hard-to-reach area. The abrasive material is sucked in by a large 1.7 m long rubber suction hose. The recommended grain size of the abrasive is 0.8mm

    In stock
    81,59 € with VAT
  • Blow Gun - Short, Aircraft

    Blow Gun - Short, Aircraft

    Air Blowing Gun with Long Nozzle Nozzle Diameter: 4mm Air Consumption: 100-200 l / min Gun with Quick Coupler Max. operating pressure: 6 bar

    In stock
    7,09 € with VAT

Air tools and accessories