Tire and pressure gauges

Tire inflation pressure gauge with pressure gauge, calibrated pressure gauge Test gauge has been performed, filler has a seal. A 63mm diameter alarm clock is fitted with a rubber casing Clearly arranged Bar and PSI Max. Measuring up to 10 Bar and 140 PSI Max. Pressure: 12 Bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold

Tyre inflation gun with pressure gauge Working range: 0-12bar / 0-170 PSI Hose thread: G 1/4" Thread for pressure gauge: M11x1.0 The alarm clock with a diameter of 60 mm is equipped with a rubber cover The rubber hose with a total length of 350 mm is equipped with a straight end with a safety segment Releasing is done by pressing the button on the body of the gun A mandrel is mounted on the filler for connection to a standard quick coupler in the pressure distribution

Tire Inflator, Tire Pressure Gauge with Alarm / Pressure Gauge / Pressure Gauge Digital Signage Measurement in Bar, PSI, KPa, Kg / cm2 Alarm Diameter 60mm, Rubber Case The total distance of the rubber hose is 400mm (including the end cap). Release by pushing the button on the body of the filler Including the air inlet terminal that is compatible with the standard quick couplings Power supply for 2x small pencil battery Trn na quick coupling or hose nipples required to connect this filler into the pressure manifold can be purchased with us

Tire Pressure Gauge (Tire Pressure Gauge) Alarm Diameter 63mm, Rubber Case Scale: 0- 12 Bar 0 - 170 PSI Rear Male Thread 1/4 "G The manometer can be used to control the piston in the pneumatic circuit or as a spare part for the ZG-10 type tire filler

Tire Pressure Gauge (Tire Pressure Gauge) Alarm Diameter 63mm, Rubber Case Scale: 0- 4 Bar, Gentle Division 0-1,1 Bar Underground Male Thread 1/4 "G" Pressure gauge can be used for pneumatic circuit control, as a spare part for ZG-3 type tire filler

Tire Pressure Gauge (Tire Pressure Gauge) Alarm Diameter 63mm, Rubber Case Scale: 0- 4 Bar Fine Scale Gauge from 0 to 1.1 Bar. Rear male thread 1/4 "G Pressure gauge can be used to check the pressure in the pneumatic circuit or as a spare part for the tire filler

Tire Pressure Gauge (Tire Pressure Gauge) Alarm Diameter 63mm, Rubber Case Scale: 0-8 Bar. 0-120 PSI Bottom 1/4 "male thread Gauge can be used to check the piston in the pneumatic circuit or as a spare part for the ZG-3 type tire filler

Tire Pressure Gauge (Tire Pressure Gauge) Alarm Diameter 63mm, Rubber Case Scale: 0-8 Bar 0 - 120 PSI Rear Male Thread 1/4 "G The manometer can be used to control the piston in the pneumatic circuit or as a spare part for the ZG-10 type tire filler

Rubber hose for tire filler, tire gauge Overall length 370mm With 1/4 "G (1/4" G) male thread at one end Screw in filler the other end is the end with a securing segment

The nipple nipple has a diameter of 15.5mm The height of the end piece with the lever is 31mm

Hexagon socket : M10x1,0 You need to buy special type SP20 quick coupler - see related products

Metal Tip for Tire Filling