Tire fillers

Tire inflation pressure gauge with pressure gauge, calibrated pressure gauge Test gauge has been performed, filler has a seal. A 63mm diameter alarm clock is fitted with a rubber casing Clearly arranged Bar and PSI Max. Measuring up to 10 Bar and 140 PSI Max. Pressure: 12 Bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold

Tire Inflator, Tire Pressure Gauge with Alarm / Pressure Gauge / Pressure Gauge Digital Signage Measurement in Bar, PSI, KPa, Kg / cm2 Alarm Diameter 60mm, Rubber Case The total distance of the rubber hose is 400mm (including the end cap). Release by pushing the button on the body of the filler Including the air inlet terminal that is compatible with the standard quick couplings Power supply for 2x small pencil battery Trn na quick coupling or hose nipples required to connect this filler into the pressure manifold can be purchased with us

- .

Tire inflation guns with pressure gauge 60mm alarm clock is fitted with rubber case Bar graph and PSI Max. measurements up to 12 bar and 170 PSI Rubber hose with a total length of 350 mm is provided with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold The scale manometer may vary.

Tire inflation guns with pressure gauge 60mm alarm clock is fitted with rubber case Bar graph and PSI Max. Measuring up to 8 Bar and 120 PSI Rubber hose with a total length of 350mm is provided with a straight end with a securing segment Release by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold The scale manometer may vary.

Tire inflation gun, tire inflator with front alarm clock / manometer / pressure gauge Range 0 - 12 bar( atm) Alarm clock diameter: 80mm(s with rubber cover 110mm) Control: After fitting the fitting to the valve, the pressure gauge shows the tire pressure. If the tire pressure needs to be reduced, the trigger must be pressed slightly. When the trigger is fully depressed, the tire is filled Classic quick-release end cap

Tire Inflator, Tire Pressure Gauge with Front Alarm / Gauge / Pressure Gauge Measurement in Bar, PSI, KPa, Kg / cm2 Measuring Ranges: 0-255 PSI 0-18 Bar 0-15 kg / cm2 0-1800 KPa Alarm Clock Diameter 60mm, Equipped with Rubber Sheath Overall Length Rubber Hose is 480mm (including End) The end cap for this tire filler is two-sided, it is suitable for inflating the tire of the truck in the double-fitting version The trigger is located front The drain is done by pressing the button on the filler body 1/4 "G (internal thread 1/4 "G) Quick coupler included

Tire pressure guns with pressure gauge, type TG-8 Measuring range: 0-220 PSI / 0-15 kg / cm2 / 0-1500kPa Alarm clock has a diameter of 50mm. Trigger with lever Supplied with quick release coupling pin and tire filling end

Tire inflation guns with pressure gauge 60mm alarm clock is fitted with rubber case Bar Scale and PSI Max. measuring up to 10 Atm, scale up to 12 bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pressing a button on the pistol body On the filler is mounted a pin for connection to a standard quick coupling pressure distribution