Power tools and machines

Used to bend materials of flat, square and circular cross-sections and thick-walled heating pipes. Max. Material dimensions Round timber: 16mm Concrete steel: 14mm Square steel: 16x16mm Steel strip - radius bend: 10x50mm Steel strip - sharp bend: 6x50mm < br> Scope of delivery: 24, 30, 37, 43, 49, 62 and 75 mm O 24 , 30, 37, 43, 49, 62 and 75 mm Provides a truly economic way of bending common shapes and bends. The bending head with the lever is detachable and easy to carry; with a clamping pad (Order No. 1010 250.W) can be clamped to a vice in various workplaces, service wagons, etc. Can bend simple and complex shapes, bends up to 180 °, various closed shapes - all Cold. An angular stop is used to ensure precision in series production. In combination with the shaping tool, the bending machine enables the production of decorative grilles, garden furniture or decorative elements in interiors and exteriors. Extension lever for greater bending power. Rigid stand with base for machine anchoring.

Used for bending of 3/4 ", G 1/2", G 3/4 "heating and plumbing tubes in cold weather. For one dimension, a set (2 pieces) of rollers is required. Internal bending radius: - G 3/8 ": 102 mm - G 1/2": 108 mm - G 3/4 ": 112 mm

They are used for bending flat steel strip with a width of up to 50 mm and a thickness of 7 mm and for the bending of square steel up to 16 × 16 mm with a bending cross. This set is designed for artistic locksmith work but is also suitable for common locksmith work. The set consists of eight rollers. Extends the bending capabilities of the following diameters: - pr. 110, 150, 175 and 200 mm.

The hand-held electric heater is suitable for fast deburring and chamfering of edges of various metallic materials. Suitable for machining various materials: steel, aluminum, non-ferrous metals, plastics, etc. Suitable for large metal profiles, frames, beams - for assembly . Cutting depth: 0 to 7mm( infinitely adjustable) Bevel angle: 15 ° to 45 ° C 28 infinitely adjustable) Motor power: 370W < br> Speed: 3500rpm Power supply: 380V Dimensions: 360x200x260mm Machine parts are: * Guide rail 200mm * Milling head interchangeable SK inserts SPUN 1203 * Operating and service tools Designed for light to medium load.

segment

Excellent helper when bending pipes from bricked steel, brass and copper materials. Max. wall thickness - steel: 2mm Max. wall thickness - other materials: 1,5mm Max. bending angle: 180 ° Roller set in diameters 5 - 6, 8, 10, 12 mm - > Clamping can be directly on the worktop by means of a built-in clamp or clamping into the claws of a vice • Contains a set of 4 pieces of interchangeable pulleys around which the bending of the pipes is performed by the lever • The reverse part of the lever serves as the key to release the pulley when it is exchanged for another Allows also the clamping of the material when it is cut to the required length, thus replacing the vice Bending is possible up to 180 ° in all the planes, ie the space It is suitable for installation workers during assembly hydraulic distributors, plumbers, car mechanics, locksmiths, etc.

KA35 math drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-35mm Drilling depth: 210mm Stroke: 120-210mm Speed: 450 rpm Cooling: yes, internal Clamping force: 1000kg Magnetic base: 80 x 168mm, fixed Power: 1100W Total height: 370-550mm Total height: 275mm Base height: 125mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools are used thanks to will last longer.

KA40 math drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-40mm Drilling depth: 110mm Stroke: 170mm Speed : 450 rpm Cooling: yes, internal Clamping force: 1100kg Magnetic base: 85 x 170mm, fixed Power: 1100W Total height: 330-510mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools used thanks to the durability of the drill. Built-in sensor checks the attachment of the magnetic drill to the base, in case of release it shuts down the motor. rusty pedestal, clips, insufficient pedestal force(below 6mm), or it lights up even at too high a feed. The green light indicates that the magnetic force is is sufficient For example, the base is firmly attached to the base and the drill can be used safely.

KAS40 matting drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-40mm Drilling depth: 110mm Stroke: 180mm Speed : 450 rpm Cooling: yes, internal Clamping force: 1100kg Magnetic base: 85 x 170mm, rotatable by 360 Â ° Power: 1100W Total height: 340-520mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and more used fastening - ie rusty base, clips, insufficient strength of the base(below 6 mm), or it may light up even at too high feed. Green indicator light indicates that the magnetic force j If sufficient, the base is firmly attached to the base and the drill can be used safely.

KA50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1150W Total height: 420-560mm Total height: 280mm Base height: 120mm Voltage Power: 230V Thanks to the double line - the rail is achieved much higher stability and drilling accuracy. , the surface is smoother. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor The red light indicates insufficient fastening - ie rusty base, clips , insufficient base force(below 6 mm), or it may light up at very high feed. Green light indicates That the magnetic force is sufficient, the base is firmly connected to the base and the drill can be used safely.

KAS50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, rotatable through 360 Â ° Power: 1150W Total height : 430-570mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling portability.The drilled holes are more accurate, the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening. insufficient fastening - ie rusty base, buckles, insufficient base force(below 6 mm), or lights up even if it is too high. scroll © m scroll. Green light with ignores that the magnetic force is sufficient, the base is fi rmly connected to the base and the drill can be used safely.

KATV55 matting drill with double guided spindle sensor. Clamping: taper MK2 holder Weldon 3/4 "(19.05mm) Working range(drill diameter): 12-55mm Working range(A… â„ c Thread cutting): M6-M20 Drilling depth: 110mm Stroke: 170mm Speed: 100-250 rpm and 180-450 rpm, right left-hand drive Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1250W Total height: 420-560mm Total width: 280mm Base height: 120mm Power supply: 230V Suitable for cutting threads M6-M20 Thanks to the double guide - the rail is achieved much higher stability and drilling portability The drilled holes are more accurate, the surface is smoother The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor. Red light indicates insufficient fastening - ie rusty base, clips, insufficient the initial force of the base(below 6mm) , it may light up even at too high a feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.