Homepage Power tools and machines

Power tools and machines

Product count: 110
  • Magnetic drill KA 50 Blue-Mag, Karnasch

    Magnetic drill KA 50 Blue-Mag, Karnasch

    KA50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1150W Total height: 420-560mm Total height: 280mm Base height: 120mm Voltage Power: 230V Thanks to the double line - the rail is achieved much higher stability and drilling accuracy. , the surface is smoother. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor The red light indicates insufficient fastening - ie rusty base, clips , insufficient base force(below 6 mm), or it may light up at very high feed. Green light indicates That the magnetic force is sufficient, the base is firmly connected to the base and the drill can be used safely.

    On request
    1.862,59 € with VAT
  • Magnetic drilling machine KAS 50 Blue-Mag, Karnasch

    Magnetic drilling machine KAS 50 Blue-Mag, Karnasch

    KAS50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, rotatable through 360 Â ° Power: 1150W Total height : 430-570mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling portability.The drilled holes are more accurate, the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening. insufficient fastening - ie rusty base, buckles, insufficient base force(below 6 mm), or lights up even if it is too high. scroll © m scroll. Green light with ignores that the magnetic force is sufficient, the base is fi rmly connected to the base and the drill can be used safely.

    On request
    1.974,27 € with VAT
  • Magnetic drilling machine KATV 55 Blue-Mag, Karnasch

    Magnetic drilling machine KATV 55 Blue-Mag, Karnasch

    KATV55 matting drill with double guided spindle sensor. Clamping: taper MK2 holder Weldon 3/4 "(19.05mm) Working range(drill diameter): 12-55mm Working range(A… â„ c Thread cutting): M6-M20 Drilling depth: 110mm Stroke: 170mm Speed: 100-250 rpm and 180-450 rpm, right left-hand drive Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1250W Total height: 420-560mm Total width: 280mm Base height: 120mm Power supply: 230V Suitable for cutting threads M6-M20 Thanks to the double guide - the rail is achieved much higher stability and drilling portability The drilled holes are more accurate, the surface is smoother The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor. Red light indicates insufficient fastening - ie rusty base, clips, insufficient the initial force of the base(below 6mm) , it may light up even at too high a feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    1.992,95 € with VAT
  • KATSV 55 Blue-Mag, Karnasch magnetic drill

    KATSV 55 Blue-Mag, Karnasch magnetic drill

    KATSV55 math drill with double guided spindle sensor. Clamping: taper MK2 holder Weldon 3/4 "(19.05mm) Working range(drill diameter): 12-55mm Working range(A… â„ c Thread cutting): M6-M20 Drilling depth: 110mm Stroke: 195mm Speed: 100-250 rpm and 180-450 rpm, right left-hand drive Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, rotatable through 360 Â °, displaceable by 16mm on both sides Power: 1250W Total height: 430-570mm Total height: 280mm Base height : 120mm Power supply: 230V Suitable for cutting M6-M20 threads Thanks to the double guide - the rail achieves much higher stability and drilling accuracy. the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base., in the event of a release, shuts off the engine. ie rusty pedestal, clips, insufficient pedestal strength(belo w 6mm), possibly lights up even at too high feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    2.123,38 € with VAT
  • Magnetic drill KA 100 Blue-Mag, Karnasch

    Magnetic drill KA 100 Blue-Mag, Karnasch

    KA100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(eg drill): 12-100mm Working range(reaming) nAf :: 6 -32mm Drilling depth: 240mm Stroke: 255mm Speed: 110 rpm, 170 rpm, 245 rpm and 385 rpm Cooling: yes, internal Clamping force: 2050kg Magnetic base: 102 x 212mm, fixed Power: 1700W Total height: 480-690mm Overall width: 340mm Base height: 130mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability Drilling holes are more accurate, the surface is smoother and the tools used make it last longer. The built-in sensor checks the mounting. base, in case of loosening it shuts down the motor.(below 6mm), if necessary lights up when the feed is too high. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    2.432,40 € with VAT
  • Magnetic drilling machine KAS 100 Blue-Mag, Karnasch

    Magnetic drilling machine KAS 100 Blue-Mag, Karnasch

    KAS100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(eg drill): 12-100mm Working range(reaming) nAf :: 6 -32mm Drilling depth: 240mm Stroke: 295mm Speed: 110 rpm, 170 rpm, 245 rpm and 385 rpm Cooling: yes, internal Clamping force: 2050kg Magnetic base: 102 x 212mm, rotatable by 360 Â °, movable by 22mm on both sides Power: 1700W Total height: 530-740mm Total height: 340mm Base height: 130mm Power supply: 230V Thanks double Driven holes are more accurate, the surface is smoother and the tools used make it last longer. Built-in sensor checks the attachment of the magnetic drill to the base, in case of release it shuts down the motor.Red light indicates insufficient attachment - ie rusty pedestal, clips, insufficient the new force of the base(below 6 mm), it may light up at too high a feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    2.819,83 € with VAT
  • KATV 100 Blue-Mag magnetic drill, Karnasch

    KATV 100 Blue-Mag magnetic drill, Karnasch

    KATV100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-100mm Working range(A… â„ c Thread cutting: M6 -M32 Working range(reaming): 6-32mm Drilling depth: 220mm Stroke: 255mm Speed: 60-140 rpm and 200-470 rpm, right left-hand drive Cooling: yes, internal Clamping force: 2050kg Magnetic base: 85 x 180mm, fixed Power: 1800W Total height: 480-690mm Total height: 340mm Base height: 130mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools are used thanks to Built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it shuts down the motor. fastening - ie rusty base, clips, not the initial force of the base(below 6mm ), it may light up even at too high a feed. The green li ght indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    2.773,85 € with VAT
  • KATSV 100 Blue-Mag magnetic drill, Karnasch

    KATSV 100 Blue-Mag magnetic drill, Karnasch

    KATV100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-100mm Working range(A… â„ c Thread cutting: M6 -M32 Working range(reaming): 6-32mm Drilling depth: 240mm Stroke: 295mm Speed: 60-140 rpm and 200-470 rpm, right left-hand drive Cooling: yes, internal Clamping force: 2050kg Magnetic base: 85 x 180mm, swivel 360 Â °, slidable by 22mm on both sides Power: 1800W Total height: 510-720mm < br> Total height: 340mm Pedestal height: 130mm Power supply: 230V Thanks to the double line - the rail is achieved far higher stability and drilling portability.The drilled holes are more accurate A , the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base, in the case of loose The red light indicates insufficient upe exterior - ie rusty pedestal, clips, insufficient pedestal strength(below 6mm), possibly lights up even at too high feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

    On request
    3.099,22 € with VAT
  • FP 30, Optimum press brake

    FP 30, Optimum press brake

    Bending and folding bending machine with removable bending segments, convenient bending of the bending bar by lever. Specified for use in a vice (not included). Max Material Width: 320mm Maximum Sheet Thickness: 2,5mm Folding - Aluminum / Copper: 300x2mm Folding - Steel Sheet: 300x1mm Weight 13kg

    On request
    214,36 € with VAT
  • Metal band saw SP 13 V, Optimum

    Metal band saw SP 13 V, Optimum

    Precision metal band saw with angles. Ideal for use in construction and assembly. Ideal for cutting iron, steel, aluminum, copper, PVC and teflon Continuous speed control in the range 30 - 80 m / min Guaranteed cutting accuracy max. 0.3 mm / 100 mm cutting length Massive adjustable arm made of pressure die-cast aluminum with transport fuse DC low-speed and carbon brush provides up to 10 times longer machine life Stable base plate with anti-slip feet Including stop material and bi-metal saw blade Cutting area? 0 ° 125 mm Cutting area? 0 ° 125 × 125 mm Cutting area? 0 ° 125 mm Cutting area? 45 ° 80 mm Cutting area? 45 ° 80 × 80 mm Cutting area? 45 ° 80 mm Cutting area? 60 ° 45 mm Cutting area? 60 ° 45 × 50 mm Cutting area? 60 ° 45 mm Band Saw Dimensions 1440 × 13 × 0.65 mm Cutting Speed ??30 m / min - 80 m / min Continuous Speed ??Change Yes Base Dimensions 720 × 320 mm Power consumption 850 W Electrical connection 230 V Weight 19 kg

    On request
    715,64 € with VAT
  • TS 305 Quantum Disc grinding machine

    TS 305 Quantum Disc grinding machine

    Front grinder universally usable for machining metals. Diameter of grinding wheel: 305 mm Work table dimensions: 440 × 155 mm Speed ?? 1420 rpm min Table Tilt Angle: 45 ° to - 45 ° Power Consumption 900 W Electrical Connection 230 V Dimensions × v × h): 360 × 440 × 400 mm Comfortable main switch in IP 54 with undervoltage starter and motor protection Wide range of applications for metal machining , wood and other materials Coarse, fine and shaped grinding Grinding table is tiltable from -45 ° to Standard bevel stopper tiltable from -60 ° to 60 ° Balanced aluminum grinding plate due to silent running Powerful engine

    On request
    453,06 € with VAT
  • Opti BF 20 Vario table type milling machine

    Opti BF 20 Vario table type milling machine

    Extremely stable drill-milling machine for very precise, fast and safe work. With electronically adjustable spindle speed and digital pinion stroke reading Milling head tilts o / - 90 °, allowing milling and drilling at different angles Drilling power max. (steel): 12mm (with pre-drilling) Drilling capacity of the machine. (cast iron): 14mm (with pre-drilling) Max. diameter of knife head: 63mm MK2 / M10 Pin Feeder: 50mm Spindle Speed: 90-1480 rpm; 150-3000 rpm. Number of speeds: 2, continuously adjustable Table dimensions: 500x180mm Y axis travel range: 275 / 175mm X-axis displacement range: 280mm Engine power: 850W / 230V Main dimensions 745x565x935mm Weight 103kg

    On request
    2.195,62 € with VAT

Power tools and machines