Power tools and machines
-
Grinders for drills, cutters, taps
-
Hand power tools
-
Threads
-
Toys
-
Profile and tube benders
-
Signers
-
Pressure presses
-
Lathes
-
Machine drills
-
Mills
-
Opti BF 20 L Vario table type milling machine
Extremely stable drill-milling machine for very precise, fast and safe work. With electronically adjustable spindle speed and digital counting of pinion stroke Milling head tilts o / - 90 °, which allows milling and drilling at different angles Loadable dovetail clearance in all three axes Drilling power max. (Steel): 12mm (with pre-drilling) Drilling capacity of the machine. (cast iron): 14mm (with pre-drilling) Max. diameter of knife head: 63mm MK2 / M10 Pin Feeder: 50mm Spindle Speed: 90-1480 rpm; 150-3000 rpm. Number of speeds: 2, infinitely adjustable Table dimensions: 700x180mm Y axis travel range: 275 / 175mm X-axis travel range: 480mm Engine power: 850W / 230V Main dimensions 950x565x935mm Weight 103kg
On request2.482,06 € with VAT -
DDP10 Quantum hand press
Hand press suitable for compressing and distinguishing bearings. The construction is a stable body made of high quality gray cast iron, lever and push rod made of chrome plated steel. Worktop with four notches is swivel. Manual force 392.4 N (40 kg), effective force 7 480 N (763 kg) Manual force 490.5 N (50 kg), Effective force 9350 N (953 kg) Manual force 589 N (60 kg), Effective Force 11 220 N (1,143 kg) For Compression and Sliding Bearings Stable Design High Gray Cast Iron Body Steel Lever and Push Rod > Rotary work plate with four slot sizes Push rod dimensions: 25 × 25 × 340 mm 95 mm outboard Working height 123 mm Dimensions 180 × 410 × 270 mm Weight 14 kg
In stock142,74 € with VAT -
DDP20 Quantum hand press
Hand press suitable for compressing and distinguishing bearings. The construction is a stable body made of high quality gray cast iron, lever and push rod made of chrome plated steel. Worktop with four notches is swivel. Manual force 392.4 N (40 kg), effective force 8 364 N (853 kg) Manual force 490.5 N (50 kg), effective force 10 455 N (1065 kg) Manual force 589 N (60 kg), Effective force 12,555 N (1,280 kg) Pressure and compression bearings Stable construction High quality cast iron cast iron Lever and push rod made of chrome plated steel Rotary work plate with four slot sizes Push rod dimensions: 31 × 31 × 450 mm 120 mm pitch Work height 195 mm Dimensions 235 × 680 × 430 mm Weight 33 kg
In stock309,84 € with VAT -
DDP30 Quantum hand press
Hand press suitable for compressing and distinguishing bearings. The construction is a stable body made of high quality gray cast iron, lever and push rod made of chrome plated steel. Worktop with four notches is swivel. Manual force 392.4 N (40 kg), Effective force 7 705 N (786 kg) Manual force 490.5 N (50 kg), Effective force 9 632 N (982 kg) Manual force 589 N (60 kg), effective force 11,566 N (1,179 kg) For pressing and pressing of bearings Stable construction High quality cast iron cast iron Lever and push rod made of chrome plated steel < Rotary work plate with four slot sizes Push rod dimensions: 40 × 40 × 600 mm 150 mm pitch Working height 310 mm Dimensions 260 × 850 × 455 mm Weight 55 kg
On request476,93 € with VAT -
Table lathe OPTIturn TU 2404(400 V) - demonstration piece
Cost-effective, high-precision and fully equipped lathe for demanding users. Ideal for any model and home workshop. Also available in Vario with variable speed adjustment. Tip height 125 mm Max. diameter above the bed 250 mm Spindle MK3 Distance between spikes 450 mm Width of bed 135 mm Spindle speed 125 - 2000 rpm Shifting speed change no Number of gears Degrees 6 Spindle Traverse 21 mm Pin Feed 70 mm MK2 Cone Pin Cone Longitudinal Feed Rate 0.1 - 0.2 mm / rev. Max. Feed Shaft Feed 70 mm Max. feedrate of the transverse support 110 mm Metric thread 0,4 -3,5 mm / rev. Thread Inch 10 -44 H / 1 " Power Consumption 750 W Electrical Connection 400 V Dimensions 1020 × 560 × 520 mm Weight 110 kg Scope of delivery: Clamping heart HSS lathe & 8 - 44 G / inch Thread Tool Case Test Report 3-Jaw Chuck O 125 mm Fixed Tip MK2 Fixed Tip MK3 Chuck Cover High precision machining Spindle face runner
In stock2.052,39 € with VAT -
Manual hydraulic pipe bender HRB 10
With six segments for diameters 1/2 "- 2 Universal for heating and plumbing applications, steel and non-ferrous metals Contains segments 1/2", 3/4 ", 1", 1 1 / 4 ", 1 1/2", 2 " Forming capacity: 10,000 kg Bending pressure: 10 t Piston stroke: 155 mm Dimensions (W x H x D) ): 710 × 590 × 220 mm
On request500,81 € with VAT -
SDS plus 1250W 4J drilling hammer
Drilling hammer 1250W Drilling and mowing hammer intended for drilling in masonry and concrete, light and medium heavy mowing into masonry and concrete and slicing of tiles or plasters. Voltage / Frequency: 230V / 50Hz Power Consumption: 1250W Speed ??800 / min. Number of clicks: 3200 / min. Throttle force 4J Max. 32mm diameter drill bit Handle: SDS plus Chuck Reduction, 3x drill bit (8-10-10mm), 2 chisel (flat 250x20mm and 250mm spoke) Supplied in Trunk Weight: 5.9kg
On request96,44 € with VAT -
Planer with ADH 250 stretch
For Home & Small Workshop & Mounting Ideal for Mobile Use Cutter Joint for Planing and Protraction Automatic Workpiece Shift During Stretching Central Adjustment Height Powerful 1500W / 230V Motor With Thermal Fuse Planing Table Dimensions: 1050x260mm < br> Table dimensions: 450x254mm Max Working Width: 254mm Height of Manhole / Max .: 6 / 160mm Maximum Chip Removal: 2mm Planing Roller Diameter / Number of Knives: 50mm / 2 Cylinder speed 8500 rpm. Engine Performance: 1500W / 230V Dimensions: 1150x500x570mm Weight 40kg
On request772,92 € with VAT -
Drill grinding machine 3-13mm 90-140°, VDG-13A
90-140 ° Angle Grinders, the compact grinder can quickly and precisely trim the drills with the top corner angles of 90 - 140th. According to the diameter of the drill, you select the correct collet, insert it in the holder and insert the drill bit ER20 collector set is part of the grinder: 3/4/5/6/7/8/9/10/11/12 / 13mm Usage: The grinding machine is suitable for grinding of right-handed spiral drills with cylindrical and taper shanks. Grinding wheel CBN
On request788,77 € with VAT -
Original adapter for drill grinder VDG-13A, 3-13mm
Original adapter for drill grinder VDG-13A Allows you to clamp drills up to 13 mm in diameter in the VDG-13A grinder. For collets: ER20 Clamping range: 3-13mm Tightening wrench nut can be purchased - see related products You can also buy a pliers !Tiny ER20 - see related products.
On request76,59 € with VAT -
Extension set 14-20mm for drill grinder VDG-13A
This expansion kit allows you to grind drills in the 14-20mm range on the VDG-13A grinder. Set contents: 1x set of collets ER32: 14/15/16/17/18/19/20 mm 1x Clamping adapter 1x Wrench * The collets allow the clamping of decimal drills(14.2mm / 16.5mm / 19.8mm, etc.)
In stock135,87 € with VAT