Pneumatic taps

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmax 700mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1400mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products

Adjustable swivel angle head For pneumatic taps: according to the selected variant Inclination: 90 °

Air Tapping / Thread Cutting Range: M8-M16 Speed: 230-250 rpm For Taps Adapters - Type: TC-820 Clamping Head Diameter into the sleeve of the arm: 61,3mm Thread cutting without adapter for taps - see related products Order no. No. 3404-434

Replacement plastic shield for shield