Air tools and accessories

Spare nozzle for large HVLP spray gun with upper container Nozzle diameter 2.0 mm Total needle length x Dimensions of individual needle parts see.2. picture

Replacement plastic shield for shield

High Pressure Spray Gun with Bottom Bottle Aluminum Bottom Bottle Nozzle mm Working Pressure 2.5 - 4.5 Kgf / cm2 Bottle Capacity Approx. 500ml (0.5l) 1/4 "G Color and Pressure Control Horizontal & Vertical Color Spray Control Double Action Gun (Two-Stage Trigger) = Only Air or Air Release & Colors Package Included / nozzle dismantling, 1/4 "male threaded spindle, cleaning brush

Small varnishing gun with upper plastic container for painting small parts. MINI HVLP Pistol is fitted with a 0.8mm stainless steel nozzle (available to buy 1.0mm) More than 75% transmission efficiency with less than 10% pressure drop Air consumption 2.7 - 68 m3 / h

Replacement Nozzle for MINI HVLP Spray Gun with Top Cartridge Nozzle Diameter 1.0mm Overall Needle Length 80mm Dimensions of Individual Needle Parts see 2. image Nozzle is suitable for pistols JB_P19640 and PR 10.25-007

Upper plastic bottle for large HVLP spray gun Content 0.6l > PROTECO thread to which this container is intended: 15.5mm (measured by sliding scale)

Teflon Insulation Tape Width: 12mm Strength: 0.075mm Length 10m Used for Sealants in Pneumatic Distribution

Manual oil compressor for general use in household, workshop. Filling capacity: 206 l / min Maximum pressure: 10 bar Pressure vessel volume: 15 l Speed: 2850 rpm Engine power: 1500W Power: 230V < br> There is a 3-compressor kit for the compressor.

Tire pressure guns with pressure gauge, type TG-8 Measuring range: 0-220 PSI / 0-15 kg / cm2 / 0-1500kPa Alarm clock has a diameter of 50mm. Trigger with lever Supplied with quick release coupling pin and tire filling end

Tire inflation guns with pressure gauge 60mm alarm clock is fitted with rubber case Bar Scale and PSI Max. measuring up to 10 Atm, scale up to 12 bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pressing a button on the pistol body On the filler is mounted a pin for connection to a standard quick coupling pressure distribution

Rubber hose to the tire filler, to the tire inflation pistol Overall length of the set is 500 mm The hose at one end is fitted with a male thread "G, which is screwed into the filler, at the other end is a two-sided terminal for tire inflation - especially suitable for double-assemblies (double-mounted)

Pneumatic blowing / blowing pistols with rubber hose for trucks 10 bar, internal diameter approx. 4mm. The hose and gun quick release couplings are made of steel. The T-splitter (quick-connect air plastic) with a self-locking segment is also included. This T-splitter serves to hold 6mm diameter hoses