Profile and tube benders

Used to bend materials of flat, square and circular cross-sections and thick-walled heating pipes. Max. Material dimensions Round timber: 16mm Concrete steel: 14mm Square steel: 16x16mm Steel strip - radius bend: 10x50mm Steel strip - sharp bend: 6x50mm < br> Scope of delivery: 24, 30, 37, 43, 49, 62 and 75 mm O 24 , 30, 37, 43, 49, 62 and 75 mm Provides a truly economic way of bending common shapes and bends. The bending head with the lever is detachable and easy to carry; with a clamping pad (Order No. 1010 250.W) can be clamped to a vice in various workplaces, service wagons, etc. Can bend simple and complex shapes, bends up to 180 °, various closed shapes - all Cold. An angular stop is used to ensure precision in series production. In combination with the shaping tool, the bending machine enables the production of decorative grilles, garden furniture or decorative elements in interiors and exteriors. Extension lever for greater bending power. Rigid stand with base for machine anchoring.

Used for bending of 3/4 ", G 1/2", G 3/4 "heating and plumbing tubes in cold weather. For one dimension, a set (2 pieces) of rollers is required. Internal bending radius: - G 3/8 ": 102 mm - G 1/2": 108 mm - G 3/4 ": 112 mm

They are used for bending flat steel strip with a width of up to 50 mm and a thickness of 7 mm and for the bending of square steel up to 16 × 16 mm with a bending cross. This set is designed for artistic locksmith work but is also suitable for common locksmith work. The set consists of eight rollers. Extends the bending capabilities of the following diameters: - pr. 110, 150, 175 and 200 mm.

Excellent helper when bending pipes from bricked steel, brass and copper materials. Max. wall thickness - steel: 2mm Max. wall thickness - other materials: 1,5mm Max. bending angle: 180 ° Roller set in diameters 5 - 6, 8, 10, 12 mm - > Clamping can be directly on the worktop by means of a built-in clamp or clamping into the claws of a vice • Contains a set of 4 pieces of interchangeable pulleys around which the bending of the pipes is performed by the lever • The reverse part of the lever serves as the key to release the pulley when it is exchanged for another Allows also the clamping of the material when it is cut to the required length, thus replacing the vice Bending is possible up to 180 ° in all the planes, ie the space It is suitable for installation workers during assembly hydraulic distributors, plumbers, car mechanics, locksmiths, etc.

  With six segments for diameters 1/2 "- 2 Universal for heating and plumbing applications, steel and non-ferrous metals Contains segments 1/2", 3/4 ", 1", 1 1 / 4 ", 1 1/2", 2 " Forming capacity: 10,000 kg Bending pressure: 10 t Piston stroke: 155 mm Dimensions (W x H x D) ): 710 × 590 × 220 mm

Manual roll bender for brake pipes with a diameter of 6 mm. It allows to perform two bending radii on the pipeline: 25 mm and 12.5 mm. Thanks to the removal of material in a small farm, it is possible to make bends R 12.5 just after screwing. Bending range 0 - 180 ° C 28Can-shaped bends can be made). Total length 240mm

Manual bender for brake / thin-walled tubes with a diameter of 3, 4 and 6mm Suitable for brake / thin-walled tubes made of material lu: copper, brass, aluminum Bending range 45 ° to 90 °. The bender contains a scale with lines for these two angles The advantage of the pliers is their compact size. You will also get to hard-to-reach places

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 8 mm Radius: 13mm Shoulder Length: 190mm & 210mm Bending Machine Bends Accurate Bending tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!