Homepage Auto - moto Beading sets, body accessories

Beading sets, body accessories

Product count: 17
  • Body pliers - punching

    Body pliers - punching

    Pliers for sheet metal punching up to 0.8mm. Perforator diameter 5mm

    In stock
    66,44 € with VAT
  • Flare set for steel pipes with a diameter of 4.75 mm

    Flare set for steel pipes with a diameter of 4.75 mm

    The sealing tool is intended for forming steel and copper brake pipe pipes by O 4.75 mm and allows to make a F-type flange on them. ka "). * compact size for use under the car, but also in the vice * especially suitable for brake line repairs directly on the vehicle(after shortening the corrosion It is possible to create a new end of the pipe without the need to disassemble the pipe) * key components hardened * surface treatment - black Package contents: Clamping plate with grip part, threaded insert, shaper, fixing screws, Allen key, manual, wooden box ka.

    On request
    66,95 € with VAT
  • Body hammer and bucks - plumbing, body kit, BGS

    Body hammer and bucks - plumbing, body kit, BGS

    set of body hammers and buckets in plastic case. Set contains 3x hammer with glass-fiber handle 4x body buckle

    In stock
    68,58 € with VAT
  • Pulling set for pipes 4,75mm DF.475A, FACOM

    Pulling set for pipes 4,75mm DF.475A, FACOM
    Recommended ✓

    Profi Wiper Bearing - Product for Copper Steel Brake and Fuel Pipe - Making Their Ends Suitable for Tubes with Outer Diameter: 4,75mm, 3/16 "and 5,25mm Hydraulic Piston 3t), compact design, can be used directly on the vehicle Main Drip Holder 475A027255) Hydraulic Piston (Part No.: DF.475A027260) Pipe Clamp (Part No.: DF.475A027204) Piston Attachment Attachment (Part No.: DF.475A027252) Adapters (Part No.: DF.475A027265) Dimensions: 212 x 200 x 75 mm

    On request
    312,34 € with VAT
  • Body pliers for mounting and punching - rotating

    Body pliers for mounting and punching - rotating

    Revolving body pliers Punching and flapping Punching machine with diameter 5mm

    In stock
    21,94 € with VAT
  • Flare set for pipes 4.75-10mm for professionals

    Flare set for pipes 4.75-10mm for professionals

    Profi perlating set - product for copper steel brake and fuel lines - making their ends Edge forming set at the ends of tubes, shape: E and F, 90 ° and 180 ° to DIN 74243 Usage: The product is suitable for copper and steel pipes with an external diameter of 4.75; 5; 6; 8; 9; 10mm -

    In stock
    95,64 € with VAT
  • Set for pressing bearings, seals, silent blocks and bushes

    Set for pressing bearings, seals, silent blocks and bushes
    ! Sale !

    Press set for seals, bearings, silent blocks, bushings, etc. Set contains: * 14pcs of bushings with diameter: 12/10 - 13,6 / 12 -15,6 / 14 - 16.8 / 15 - 17.6 / 16 - 19.7 / 18 - 21.7 / 20 - 23.7 / 22 - 26.7 / 25 - 29.7 / 28 - 34/30 -35 , 8/32 - 40/35 - 41,3 / 38 mm * 3pcs extensions length: 105 - 130 and 140mm Material: aluminum

    In stock
    16,92 € with VAT
  • Pulling set for pipes with pipe cutter 5-16mm

    Pulling set for pipes with pipe cutter 5-16mm

    Usage: The product is suitable for copper tubes with an outer diameter of 5; 6; 8; 9; 10; 12; 14 and 16mm. The simple connecting edge is made using a conical taper press. If the double hem is to be made, the supplied adapters are used in the diameter according to the pipe diameter. The set also includes a tube-shaped pipe cutter with a tilting knife for the inner edge of the pipe The set is not suitable for steel pipes - it is only for copper brake pipes !!! Adapters need to be plugged into the tube without difficulty, if it is not, you have a bad pipe (from a refrigerator, etc.). Use only the correct pipes! This is a hobby set for copper pipes !!!, used touch steel is hardened on HRC 50. Usage: Tube is the need to cut and overeat vertically. Tighten the pipe end and tighten the taper on the puller with brake fluid or oil.

    In stock
    20,35 € with VAT
  • Eccentric crimping set for pipes 4.75-10mm

    Eccentric crimping set for pipes 4.75-10mm

    Application: The product is suitable for copper pipes o outer diameter: 4.75; 5; 6; 8; 9; 10 Use only the right thin-walled tubes! Usage: The pipe needs to be cut and splayed perpendicularly. Tighten the pipe end and tighten the taper on the puller with brake fluid or oil. The end of the pipe is formed gradually - by the eccentric pushing cone - by tightening the screw. The screw has a fine thread, the touch surfaces (cone and tubes) need to be lubricated. The set is only suitable for making simple edges. The great stiffness of the puller creates precise edges.

    In stock
    28,10 € with VAT
  • Adapter 2.35 mm - former for brake pipes - for PROFI lining set(1pcs)

    Adapter 2.35 mm - former for brake pipes - for PROFI lining set(1pcs)

    Crimping Adapter for PROFI Wiper Kit (VT_4,75_10_PROFI) Copper Tube: 4,75mm Guide Shank: 2,35mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

    In stock
    3,82 € with VAT
  • Adapter 2.5 mm - former for brake pipes - for PROFI lining set(1pcs)

    Adapter 2.5 mm - former for brake pipes - for PROFI lining set(1pcs)

    Crimping Adapter for PROFI (VT_4,75_10_PROFI) Copper Tube: 5,00mm Guide Pin: 2,5mm The price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

    In stock
    3,82 € with VAT
  • Adapter 3.00mm - former for brake pipes - for sintering set VT_PS_5_16(1pcs)

    Adapter 3.00mm - former for brake pipes - for sintering set VT_PS_5_16(1pcs)

    Crimping Adapter for PROFI Perlite Set (VT_4,75_10_PROFI) For Copper Pipe: 6,00mm Guide Pin: 3,65mm Price is in one piece. When choosing a suitable form factor, it is necessary to choose one whose stem has the slightest clearance after inserting into the two-sided quality pipes.

    In stock
    1,44 € with VAT

Beading sets, body accessories