Universal chucks and acc.

Universal four-sided jaw with self-adjusting independent jaws self-centering central tightening(see attached photos) Type: 4605-160 Diameter: 160 mm Number of jaws: 4 Clamping screws: 6xM10 on the axis 140 mm Other dimensions - see attached catalog sheet in PDF. Chuck body: cast iron - Reverse jaws can be rotated - internal / external. Use: A combination of a universal chuck and a face plate. Each of the jaws is adjustable and can be tightened centrally all at once.

Universal four-sided jaw with self-adjusting independent jaws self-centering central tightening(see attached photos) Type: 4605-200 Diameter: 200 mm Number of jaws: 4 Clamping screws: 6xM10 on the axis 176 mm Other dimensions - see attached catalog sheet in PDF. Chuck body: cast iron - Reverse jaws can be rotated - internal / external. Use: A combination of a universal chuck and a face plate. Each of the jaws is adjustable and can be tightened centrally all at once.

Universal four-chuck chuck with self-aligning independent jaws self-centering central tightening (see attached pictures) Model: 4605-250 Diameter: 250 mm Number of jaws: 4 Clamping screws: 6xM16 on the 224mm axis Other dimensions - see enclosed catalog sheet in PDF. Body chuck: cast iron Reverse jaws can be rotated - inside / outside. Usage: Combination of universal chuck and face plate. Each jaw is adjustable can be tightened centrally all at once.

Intermediate flange for universal chisel ITEM for Chinese lathes For chucks: PIECE 100mm Flange diameter: 100mm Material: Steel Lathe spindle mounting: Fitting: 70mm Screw axis: 82,5mm(3x M8) < br> Chuck mounting: Fitting: 72mm Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for TOS IUS universal glass for Chinese lathes For chucks: TOS IUS 100mm Flange diameter: 100mm Material l: Steel Lathe spindle mounting: Mounting: 70mm Screw axis: 82,5mm(3x M8) Chuck mounting: Fitting: 80mm Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 100mm Flange diameter: 100mm Material : Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm | Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 125/3 or TOS IUS 125 / 4 chuck clamps Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass PIECE 125 for Chinese lathes For chucks: PIECE 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125 / 4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 80mm Diameter of flange: 80mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for TOS IUS 80/3 or TOS IUS 80/4 chuck mounting Suitable for lathes A… Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 100mm Diameter of flange: 100mm Material: Steel Mounting on lathe spindle: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Series lathes 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 100mm Diameter of flange: 100mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) < br> Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for lathes Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate screw is screwed directly onto the spindle lathe. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 125mm Diameter of flange: 125mm Material: Steel Lathe spindle mounting: < / b> Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125/4 Suitable for 300 series lathes - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting