Drill chucks

Morse taper collet holder with driver for drill/lathe Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that drive tools through this nut + drive. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. This is a direct replacement for ČSN 241491, ER collets and torque wrench need to be purchased (see related products) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) Without internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design with internal cooling Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) With internal cooling

Clamping collet chuck with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note: * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1491 Usage: Drill or lathe - for clamping drills and other tools with a cylindrical shank This is an old Czech design. We recommend switching to ER collets and ER collets.

Turning insert, Turntable cutting insert DGN1402J IC908, Iscar Cutting width: 1,4mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P15-P30 (Vc = 70-180 m / min; 230-590sfm) Stainless steel: M20-M30 (Vc = 50-180 m / 590 sfm) Cast iron: K20-K40 (Vc = 110-175m / min; 360-570 sfm) Non-ferrous metals and plastics: N05-N20 S05-S20 - -H15 Ref. No.: 6002957

Karnasch Core Clamp Clamp Morse Cone: MK3 Clamping Shanks: 3/4 "(19.05mm) No Internal Cooling

Carrier spring for core drills Size: 13x135mm Suitable for use with drive heads: 20.1293, 20.1286, 20.1310 , 20.1844 -

Adapter for weldon 3/4 "- for clamping classic drill chucks Application: For core drills with 3/4"(19,05mm) weldon chucks Drill chucks can be found - see related products

Thanks to this reduction, you can clamp larger drill diameters on a magnetic drill with weldon clamping 19mm(3/4 ") - with 32mm clamping 281 1/4") The reduction has a 7.98mm bore

Extension for drilling with core drills in greater depth Use: For core drills with 3/4" (19.05mm) weldon clamping ( or Nitto clamping) Drill chucks can be found - see related products