Homepage Clamping tools Vices, dividers and tables

Vices, dividers and tables

Product count: 274
  • Vise for drill, type VRV, VERTEX

    Vise for drill, type VRV, VERTEX
    Recommended ✓

    Robust vise for a drill or milling machine with a prismatic jaw, suitable as a replacement for vices ČSN 243160 Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants 1x prismatic jaw with mounting + 1x smooth jaw with mounting

    from 147,06 € with VAT
  • Vise under drill with prism, type BMS

    Vise under drill with prism, type BMS

    Robust vice for a drill or milling machine. Suitable replacement for vise ČSN 243160 Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Precise guidance of the jaws, the jaws do not wobble! Tightening with a trapezoidal screw that goes inside the massive handle. The vise is suitable for use with a machine drill or a smaller milling machine. Vise color may vary with delivery (blue, white)

    from 40,81 € with VAT
  • Manual vise type PS , CSN 243160 , Strojtex

    Manual vise type PS , CSN 243160 , Strojtex
    Recommended ✓

    Workshop vise for drill, milling machine, longitudinal and transverse prism, soft machinable jaws Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Standard: ČSN 243160

    from 208,51 € with VAT
  • Quick-release machine vice, type VQS, VERTEX

    Quick-release machine vice, type VQS, VERTEX
    Recommended ✓

    Mechanical vise with quickly adjustable jaw Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants Suitable under milling machine, sander, precision milling

    from 220,47 € with VAT
  • Manual vise, type MBV 2001, YORK

    Manual vise, type MBV 2001, YORK

    Workshop vise for drill, milling machine with solid aluminum handle Longitudinal and transverse prism, soft machinable jaws Width of the jaws: according to the selected variant Other dimensions - see the attached catalog sheet The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Fixing screws

    from 276,28 € with VAT
  • Manual vise, type MBV 2002 with tooth clutch, YORK

    Manual vise, type MBV 2002 with tooth clutch, YORK

    Workshop vise for drill, milling machine with massive aluminum handle and toothed clutch Width of the jaws: according to the selected variant Other dimensions - see the attached catalog sheet Adjustable lever with toothed clutch = mechanical booster of clamping force Solid aluminum handle Longitudinal and transverse prism The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Fixing screws It is possible to purchase soft machinable jaws for the vise

    from 352,63 € with VAT
  • Tilting table with T-slots

    Tilting table with T-slots

    Milling tilting table with T-slots / with T-slot Size: according to the selected variant Other dimensions - see product description for individual variants Scale: 45°-0°-45° Max. tilting in the range: 50°- 0°- 50° (i.e. also off the scale) Flatness of table surface: 0.005 mm /100mm Portability: 20' Usage : Under a milling machine, drill or sharpener

    from 161,63 € with VAT
  • Precision machine vice with large opening, type VJ, VERTEX

    Precision machine vice with large opening, type VJ, VERTEX
    Recommended ✓

    Brand precision machine vise with precision and large opening. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or see the attached catalog sheet The prismatic jaw can be purchased additionally - see related products Possible clamping with or without a wheel - both surfaces ground.

    from 361,44 € with VAT
  • Clamping angle plate reinforced, type VR, VERTEX

    Clamping angle plate reinforced, type VR, VERTEX

    Rectangular angle plate for clamping, with reinforced arm Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.01mm / 100mm.

    from 81,26 € with VAT
  • Clamping angle plate open, type VR, VERTEX

    Clamping angle plate open, type VR, VERTEX

    Rectangular angle plate for clamping Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded (all) surfaces with flatness up to 0.01mm / 100mm.

    from 61,84 € with VAT
  • Workshop vice YORK, type STANDART

    Workshop vice YORK, type STANDART

    High-quality locksmith's vise YORK mm of Czech production with anvil. Width of the jaws: according to the selected variant The jaws are made of high-quality steel hardened to 45 HRC +- 5 HRC. The vise is equipped with a set of basic jaws (hard jaws). Integrated rotary plate +- 35° with positioning screws. Precise cylindrical guidance. Gate with safety terminals. York standard type: fixed to the base plate with nuts, without special surface treatment. Other special types of jaws can be found in the folder "Jaws for YORK vices"

    from 57,45 € with VAT
  • Machine vice CSN 243135 / CSN 243136

    Machine vice CSN 243135 / CSN 243136
    Recommended ✓

    Machine vise with movable jaw - with grooved jaws ČSN 243135 for rigid and precise clamping of the workpiece Width of the jaws: according to the selected variant Height of the jaws (after the bed): according to the selected variant, or see the product description for the individual variants Other dimensions - see product description for individual variants Perpendicularity - parallelism of functional surfaces: 0.02 / 100 mm Standard: ČSN 243135 (125mm and 160mm), ČSN 243136 (200mm) Material: Body: ductile iron with min. tensile strength 400MPa Jaws: steel 14220.4, hardness 56+2 HRC

    from 659,98 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Vices, dividers and tables