Vices, dividers and tables

Rotating machine vice with full bed and groove for draining liquid Width of the jaws: according to the selected variant Revolving range: 360° Other dimensions - see attached catalog sheet or product description for individual variants Possible clamping with or without a wheel - both surfaces ground.

High-quality locksmith's vise YORK mm of Czech production with anvil Width of the jaws: according to the selected variant The jaws are made of high-quality steel hardened to 45 HRC +- 5 HRC. The vise is equipped with a set of basic jaws (hard jaws). Integrated rotating plate +- 35° with positioning handles. Precise cylindrical guidance. Gate with safety terminals. Type York Lux : * Fastening to the base plate with loops *Spindle and handles zinc chromated. Other special types of jaws can be found in related products

Branded vise with tilting in three axes. Rotatable, foldable. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The vise can be rotated 360° on the base. Vise tilt 0-90° horizontally and 0-45° vertically.

Tilting 2-axis tilting rotary machine vise with precision base Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Scale on both axes - see attached photo

Machine comb vise, quality production - Michalovce Jaw width: 250mm Jaw height: 100mm The sliding jaw is tiltable and adjustable - comb bed. Maximum opening: 550mm Total length of the vise: 800mm Total height of the vise: 200mm ČSN 243145 The movable jaw is swingable by 15° to both sides from the longitudinal axis. Packaged in a beautiful wooden case. The vise is without a handle. Weight on request.

Milling tilting table with T-slots / with T-slot and worm gear for more convenient setting of the selected angle Size: according to the selected variant Other dimensions - see product description for individual variants Scale: 50°-0°-50° Max. tilting in the range: 42°- 0°- 42° Flatness of table surface: 0.005 mm /100mm Portability: 20' Usage : Under a milling machine, drill or sharpener

Branded machine vice with wheel drive and hydraulic pressure. Width of the jaws: according to the selected variant Other dimensions - see attached photos or product description for individual variants. The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Milling tilting table with T-slots / with T-slot Size: according to the selected variant Scale: 45°-0°-15° Other dimensions - see the attached catalog sheet Usage : Under a milling machine, drill or sharpener Locksmith precision

Machine vise with hydraulic pressure Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The wedge mechanism of the jaws pushes the clamped workpiece down - the jaws do not "lift"!!! Accuracy up to 0.01mm The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. The vise bed is hardened to 45 HRC Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Guide stones and clamping screws are not part of the package.

Rotating tiltable machine vice with tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description of the individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Rotating tilting machine vice with lateral tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Milling tilting table with T-slots / with T-slot and turning table Size: according to the selected variant Scale: 45°-0°-15° Other dimensions - see the attached catalog sheet Usage : Under a milling machine, drill or sharpener Locksmith precision