Clamps for classic lathes
-
Swivel tips
-
Flange ER clamps
-
Quick release heads
-
Holders and collets 5C
-
Lathe mandrels
-
Lathe hands
-
Knife head keys
-
Live center with enlarged head, type VLC, VERTEX
Centering rotary tip with enlarged head Clamping Morse cone: according to the selected variant Other dimensions - see the attached catalog sheet Tip angle: 60° - 90° - see attached catalog sheet Material: alloyed tool steel, HRC 50
from 92,23 € with VAT -
Live center 60° - CSN 243324 , Skoda
Clearance saleMorse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
132,08 € with VAT -
Live center 90° - CSN 243324 , Skoda
Clearance saleMorse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 149,71 € with VAT -
Extended live center , CSN 243328 , Skoda
Clearance saleSwivel chuck is designed for work on lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3328 Their extended clamping part allows easy access of the tool to the workpiece, which is especially advantageous when machining tools with exchangeable inserts and when working on copying lathes. The design of the tips allows the radial clearance to be adjusted. The tips have a MORSE ČSN 22 0420 clamping shank (DIN 228, ISO 296) without a clamping thread. Swivel tips are supplied lubricated with lithium grease LV 2-3. It is recommended to relubricate tips used in extreme conditions at intervals of 300 operating hours in quantities up to 1 g through the hole in the housing head (blinded by screw S1) and up to 0.5 g through the hole at the end of the taper shank (blinded by screw S2). Disassembly of the rotating tips is not recommended.
132,98 € with VAT -
Live center 60° for heavy loads CSN 243325, Skoda
Clearance saleMorse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 60 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm
from 487,98 € with VAT -
Live center 90° for heavy loads CSN 243325, Skoda
Clearance saleMorse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 90 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm
from 487,98 € with VAT