Homepage Clamping tools Clamps for NC lathes

Clamps for NC lathes

Product count: 16
  • Radial knife holder VDI - DIN69880 B1, KEMMLER

    Radial knife holder VDI - DIN69880 B1, KEMMLER

    Right radial / longitudinal knife holder, type B1 for turning knives VDI size (clamping diameter): according to the selected variant For knives of height: according to the selected variant Cooling: according to the selected variant * see the attached table for other dimensions Standard: DIN 69880 / DIN ISO 10889-1 (VDI) B1 Usage: for NC / turret lathes

    from 58,75 € with VAT
  • Extended live center for NC machines , CSN 243327 , Skoda

    Extended live center for NC machines , CSN 243327 , Skoda
    Clearance sale

    The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.

    from 147,87 € with VAT
  • Radial knife holder VDI - DIN69880 B2, KEMMLER

    Radial knife holder VDI - DIN69880 B2, KEMMLER

    Left radial / longitudinal knife holder VDI, type B2 for turning knives VDI size (clamping diameter): according to the selected variant For knives of height: according to the selected variant Cooling: according to the selected variant * see the attached table for other dimensions Standard: DIN 69880 / DIN ISO 10889-1 (VDI 3425) B2 Usage: for NC / turret lathes

    from 54,40 € with VAT
  • Radial knife holder VDI - DIN69880 B3, KEMMLER

    Radial knife holder VDI - DIN69880 B3, KEMMLER

    Inverted right radial / longitudinal knife holder VD - type B3 for turning knives VDI size (clamping diameter): according to the selected variant For knives of height: according to the selected variant Cooling: according to the selected variant * see the attached table for other dimensions Standard: DIN 69880 / DIN ISO 10889 (VDI) - B3 Usage: for NC / turret lathes

    from 54,40 € with VAT
  • Axial knife holder VDI - DIN69880 C1, KEMMLER

    Axial knife holder VDI - DIN69880 C1, KEMMLER

    Right axial / transverse knife holder, type C1 for turning knives VDI size (clamping diameter): according to the selected variant For knives of height: according to the selected variant Cooling: according to the selected variant Other dimensions - see the attached table Standard: DIN 69880 / DIN ISO 10889-1 (VDI) Usage: for NC / turret lathes

    from 20,50 € with VAT
  • VDI holder for drills with cylindrical shank DIN69880 E1

    VDI holder for drills with cylindrical shank DIN69880 E1

    Tool holder, type E1 for VBD drills with cylindrical shank with internal cooling VDI size (clamping diameter): according to the selected variant For VBD drills with a diameter: according to the selected variant Other dimensions - see the attached table Standard: DIN 69880 - E1 Usage: for NC / turret lathes Made in the Czech Republic.

    from 19,34 € with VAT
  • VDI holder - for boring knives with cylindrical shank DIN69880 E2

    VDI holder - for boring knives with cylindrical shank DIN69880 E2

    Tool holder, type E2 for boring knives with internal cooling VDI size (clamping diameter): according to the selected variant For VBD drills with a diameter: according to the selected variant Other dimensions - see the attached table Standard: DIN 69880 - E2 Usage: for NC / turret lathes Made in the Czech Republic.

    from 74,38 € with VAT
  • Collet clamp VDI - with cylindrical shank DIN69880 E4

    Collet clamp VDI - with cylindrical shank DIN69880 E4

    Tool holder - collet clamp, type E4 VDI size (clamping diameter): according to the selected variant For collets: according to the selected variant Other dimensions - see the attached table Standard: DIN 69880 - E4 (for collets DIN 6499) Usage: for NC / turret lathes Made in the Czech Republic.

    from 78,53 € with VAT
  • VDI morse taper holder - DIN69880 F1 , KEMMLER

    VDI morse taper holder - DIN69880 F1 , KEMMLER

    Morse reduction housing - VDI, type F1 Size (clamping diameter): according to the selected variant Internal Morse cone: according to the selected variant Adjustable nozzles Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI) - F1 Usage: for NC / turret lathes It is possible to purchase a wooden case for the mandrel, which is suitable for permanent storage.

    from 74,75 € with VAT
  • VDI threaded holder for replaceable inserts, with length compensation, KEMMLER

    VDI threaded holder for replaceable inserts, with length compensation, KEMMLER

    VDI clamping holder for threaded adapters / inserts VDI size (clamping diameter): according to the selected variant Range / type of inserts: according to the selected variant Inserts for clamping taps are not part of the holders - see related products Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI 3425) Usage: for NC / turret lathes

    from 15,46 € with VAT
  • Quick-release chuck VDI - DIN69880, KEMMLER

    Quick-release chuck VDI - DIN69880, KEMMLER

    CNC VDI quick chuck VDI size (clamping diameter): according to the selected variant Clamping range: according to the selected variant Throwability: up to 0.03mm Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI 3425) Usage: for NC / turret lathes

    from 262,38 € with VAT
  • VDI quick-release chuck with internal cooling DIN69880, KEMMLER

    VDI quick-release chuck with internal cooling DIN69880, KEMMLER

    CNC VDI quick chuck with nozzles / internal cooling VDI size (clamping diameter): according to the selected variant Clamping range: according to the selected variant Throwability: up to 0.03mm Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI 3425) Usage: for NC / turret lathes

    from 354,24 € with VAT

Clamps for NC lathes