Reduction sleeves
-
Reduction sleeve ISO/MT, type DIN2080 , screw type
Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 32,60 € with VAT -
Reduction sleeve ISO/MK, type DIN2080 tang type
Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 32,40 € with VAT -
Reduction sleeve ISO/MK, type DIN2080 tang type , MCT
Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 13,37 € with VAT -
Reducer ISO/MK, type DIN2080 screw, MCT
Reduction insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant The tool inserted into this reducer is clamped in the inner cone with a screw. Standard: ČSN 247211.1, DIN 2080 Usage: Clamp / mandrel for cutters with a conical shank For clamping in ISO steep taper milling machine - manual tool change (DIN2080)
from 96,13 € with VAT -
Reduction sleeve ISO/MT, type DIN69871 , screw type
Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871, ČSN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 33,73 € with VATup to -20% -
Reduction sleeve ISO/MK, type DIN69871 tang type
Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 31,27 € with VAT -
Reduction sleeve ISO/MK, type DIN69871 tang type , MCT
Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 56,37 € with VAT -
Reducer ISO/MK, type DIN69871 screw, MCT
Reducing insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871-A, PN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
90,12 € with VAT -
Reduction sleeve ISO/MT, type BT / JIS6339 MAS , screw type
Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 41,94 € with VAT -
Reduction sleeve ISO/MK, type BT / JIS6339 MAS tang type
Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 33,55 € with VAT -
Reduction sleeve MT/MT pass-through type
Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228
from 6,13 € with VAT -
Short reduction sleeve MT/MT pass-through type
Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228
from 7,24 € with VAT