Universal chucks and acc.
-
Univ. chucks 3 Art.
-
Univ. chucks 4 Art.
-
Univ. chucks 6 Art.
-
Faceplates
-
Power chucks (machine control)
-
Chucks for wood lathes
-
Replacement jaws
-
Spare parts
-
Flanges
-
Retaining rings
-
Camlock flange 160 / D5, DIN55029 - semi-finished product
Intermediate flange with short cone with threaded pins Camlock - semi-finished product Cone size: 5( larger diameter = 82,5mm) Outer diameter of flange: 160mm Axis of clamping pins: 104,8mm Width of body of flange: 29,5mm < br> Material: Cast iron HT300 Tensile strength: 250-350MPa, Hardness: 190-240HBS Composition: Cmax = 2.8-3.2%, SiMax = 1.7-2 , 1%, Mn = 0,9-1,2%, Pmax
In stock154,54 € with VAT -
Face plate 200mm for Camlock D4, DIN55029
Face plate with T-slots, with threaded pins Camlock T-slot: T12(length 50mm) Threads: M8 Camlock D4: Size cone : 4(th diameter = 63,5mm) Outer diameter flanges: 200mm Axis clamps Caps: 82,6mm Width plate â € oLa flanges: 27,5mm Material: Cast iron HT300 Tensile strength: 250-350MPa, Hardness: 190 -240HBS Composition: Cmax = 2.8-3.2%, SiMax = 1.7-2.1%, Mn = 0.9-1.2%, Pmax
In stock191,01 € with VAT -
Universal chuck 50 mm for wood lathe(4 jaw sets)
Universal glass for use on wood lathes Diameter 50mm Threaded glass is M33 are included thread reductions: 1 "(25 , 4mm) x 8 and 3/4 "(19mm) x 16 Four-jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external
In stock191,23 € with VAT -
125 mm universal chuck for wood lathe(4 jaw sets)
Universal glass for use on wood lathe Diameter 125mm Threaded glass is M33 are included thread reductions: M33 / 1 " x8 and M33 3/4 "x16. Four jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external
In stock376,61 € with VAT -
Universal chuck 100 mm for wood lathe(4 jaw sets)
Universal glass for use on wood lathes Diameter 100mm The thread of the glass is M33 are included thread reductions: 1 "(25 , 4mm) x 8 and 3/4 "(19mm) x 16 Four-jaw design The jaw is supplied with jaws as shown - ie 2x set of internal and 2x set of external
In stock215,26 € with VAT -
Universal chuck 95 mm for wood lathe(4 jaw sets) clamping plate
Universal glass for use on a wood lathe Diameter 95mm Clamping thread on the glass is M33 threaded reducers are included: 1 " (25,4mm) x 8 and also 3/4 "(19mm) x 16 Four-jaw design The harvester is supplied no. elisti as shown - ie 2x set of internal and 2x set of external 1x clamping plate with 16 pins coated with rubber The set is supplied in an aluminum case with padding
In stock295,09 € with VAT -
Flange for lathe MN80, dia. 80mm for universal chuck, semi-finished product
Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4
In stock64,54 € with VAT