Flanges

Product count: 29
  • Bayonet type flange for universal chuck CSN 243830 / DIN55027

    Bayonet type flange for universal chuck CSN 243830 / DIN55027

    Intermediate flange with short taper with threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping screws for clamping the flange to the spindle are included in the package. Standard: CSN 243830 / DIN55027

    from 107,28 € with VAT
  • Camlock type flange for universal chuck DIN55029

    Camlock type flange for universal chuck DIN55029

    Intermediate flange with short taper with Camlock threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping pins + pin securing screws are included in the package. Standard: CSN 243830 / DIN55029

    from 112,52 € with VAT
  • Grinding flange TOS 1U, dia. 125mm with left hand thread M39x4 LH

    Grinding flange TOS 1U, dia. 125mm with left hand thread M39x4 LH

    Flange for center grinding machine TOS type 1U Flange diameter: 125mm Material: Steel Thread: M 39Af â € ”4 L(left thread)

    In stock
    96,82 € with VAT
  • Camlock 160 / D5 flange, DIN55029 for TOS IUS 160 chuck

    Camlock 160 / D5 flange, DIN55029 for TOS IUS 160 chuck

    Intermediate flange with short cone with Camlock threaded pins for universal glass TOS IUS 160 Cone size: 5(larger diameter = 82,5mm) Outer diameter of flange: 160mm Axle of clamping pins: 104,8mm Width of body of flange: 29,5mm Material: Cast steel The flange is fitted with holes and drilled holes for clamping the chuck. Clamping pins securing the pins with screws are included in the package.

    On request
    234,05 € with VAT
  • 100mm flange for Chinese lathes with 70mm shoulder and 82mm screw axis for ITEM chucks

    100mm flange for Chinese lathes with 70mm shoulder and 82mm screw axis for ITEM chucks

    Intermediate flange for universal chisel ITEM for Chinese lathes For chucks: PIECE 100mm Flange diameter: 100mm Material: Steel Lathe spindle mounting: Fitting: 70mm Screw axis: 82,5mm(3x M8) < br> Chuck mounting: Fitting: 72mm Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

    In stock
    61,20 € with VAT
  • 100mm flange for Chinese lathes with 70mm shoulder and 82mm screw axis for TOS chucks

    100mm flange for Chinese lathes with 70mm shoulder and 82mm screw axis for TOS chucks

    Intermediate flange for TOS IUS universal glass for Chinese lathes For chucks: TOS IUS 100mm Flange diameter: 100mm Material l: Steel Lathe spindle mounting: Mounting: 70mm Screw axis: 82,5mm(3x M8) Chuck mounting: Fitting: 80mm Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

    In stock
    61,20 € with VAT
  • 100mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for TOS chucks

    100mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for TOS chucks

    Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 100mm Flange diameter: 100mm Material : Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

    In stock
    53,55 € with VAT
  • 125mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for TOS chucks

    125mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for TOS chucks

    Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm | Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 125/3 or TOS IUS 125 / 4 chuck clamps Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

    In stock
    95,64 € with VAT
  • 125mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for KUS125

    125mm flange for Chinese lathes with 72mm shoulder and 84mm screw axis for KUS125

    Intermediate flange for universal glass PIECE 125 for Chinese lathes For chucks: PIECE 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125 / 4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

    In stock
    95,64 € with VAT
  • 80mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for TOS

    80mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for TOS

    Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 80mm Diameter of flange: 80mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for TOS IUS 80/3 or TOS IUS 80/4 chuck mounting Suitable for lathes A… Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

    In stock
    76,51 € with VAT
  • 100mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for ITEM

    100mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for ITEM

    Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 100mm Diameter of flange: 100mm Material: Steel Mounting on lathe spindle: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Series lathes 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

    In stock
    61,20 € with VAT
  • 100mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for TOS

    100mm flange for 300 series Chinese lathes - Proma, Asist, Einhell, Rotwerk, Sieg for TOS

    Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 100mm Diameter of flange: 100mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) < br> Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for lathes Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate screw is screwed directly onto the spindle lathe. Before purchasing this flange, remove the flange from the lathe and change the mounting

    In stock
    84,16 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Flanges