Universal chucks and acc.

Set of soft monobloc soft jaws for TOS Svitavy four-jaw universal Designation : MC Standard: ČSN 243834 The entire jaw is soft - machinable These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Base jaws / bottom ridges for TOS Svitavy three-jaw universal chuck Standard: ČSN 24 3855 Heat treated - hardened. These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Base jaws / bottom ridges for TOS Svitavy four-jaw universal chuck Standard: ČSN 24 3855 Heat treated - hardened. These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!

Soft attachments for the basic jaw of SM chucks TOS Svitavy Number of extensions: according to the selected variant Standard: ČSN 243857 / 24 3857 The attachments are soft, workable. The attachments ONLY fit TOS Svitavy soft split jaws. If you have a non-TOS universal chuck, they will not fit 100%.

Intermediate flange with short taper with threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping screws for clamping the flange to the spindle are included in the package. Standard: CSN 243830 / DIN55027

Intermediate flange with short taper with Camlock threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping pins + pin securing screws are included in the package. Standard: CSN 243830 / DIN55029

Clamping socket wrench square, handle with square, without spring! Square: according to the selected variant Standard: ČSN 230712

T-ring for TOS universal chuck Size of the square: according to the selected variant For the TOS IU chuck: according to the selected variant Version without spring Black version These are handles of Czech production

Clamping key for universal chuck, handle with square, without spring Square: according to the selected variant

T-ring for universal chuck External square dimensions: according to the selected variant Version without spring Standard: ČSN 23 0713 / 230713 These are handles of older Czech production - brand TONA

Clamping key / handle with a square for TOS Svitavy universal chuck Suitable for a chuck with a diameter of: according to the selected variant Square: according to the selected variant Other dimensions - see attached photo Standard: ČSN 243864

Spiral wheel / screw for chuck TOS IUS , IUZ , IUT , IUD , IUM Suitable for a chuck with a diameter of: according to the selected variant Standard: ČSN 243861 Suitable only for TOS chuck, for IUS, IUZ, IUT, IUD, IUM types