Homepage Clamping tools Universal chucks and acc.

Universal chucks and acc.

Product count: 118
  • Self-centering 3-jaw universal lathe chuck KUS M1 , Kovonastroje

    Self-centering 3-jaw universal lathe chuck KUS M1 , Kovonastroje
    Recommended ✓

    Three-jaw lathe scroll chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M1 (from the back of the chuck) * The HardLine design has hardened guide grooves of the jaws, the chuck has a longer service life, the grooves do not squeeze out. Additional dimensions and parameters - see the attached PDF Accuracy, accuracy - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

    from 94,54 € with VAT
  • Self-centering 3-jaw universal lathe chuck KUS M3 , Kovonastroje

    Self-centering 3-jaw universal lathe chuck KUS M3 , Kovonastroje
    Recommended ✓

    Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M3 (screws from the front only), or M2 (screws from the front and from the back) Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Including a set of Allen screws for clamping from the front only (type M3). Suitable for grinders, dividers, rotary tables, etc.

    from 107,86 € with VAT
  • Universal scroll chuck for wood lathe with thread clamping

    Universal scroll chuck for wood lathe with thread clamping

    Universal 4 jaw chuck for use on wood lathe / wood lathe with dovetail jaws Diameter of the chuck: according to the selected variant Clamping thread of the chuck: according to the selected variant Other dimensions - see product description for individual variants Four-jaw design

    from 100,94 € with VAT
  • Self-centering 3-jaw universal lathe chuck KUS M1 with SD jaws , Kovonastroje

    Self-centering 3-jaw universal lathe chuck KUS M1 with SD jaws , Kovonastroje
    Recommended ✓

    Three-jaw lathe chuck / universal chuck with set of soft split SD jaws + hard outer OJS and hard inner IJS jaws and handle Diameter: according to the selected variant Clamping: M1 Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. To the soft split jaws, it is possible to purchase a locking ring for precise adjustment of the outer and inner contact surfaces of the soft jaws - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

    from 195,85 € with VAT
  • Self-centering 3-jaw universal lathe chuck KUS - DIN55029 , Kovonastroje

    Self-centering 3-jaw universal lathe chuck KUS - DIN55029 , Kovonastroje

    Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle, with a short taper type D - camlock pins - ČSN 243830 / DIN55029 Diameter: according to the selected variant Clamping Camlock - size: according to the selected variant Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Suitable e.g. for lathes with camlock DIN ISO 702-2

    from 132,74 € with VAT
  • Self-centering 3-jaw universal lathe chuck TOS IUS , CSN 243801

    Self-centering 3-jaw universal lathe chuck TOS IUS , CSN 243801

    Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243801 Clamping: M1 (from the back of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

    from 208,56 € with VAT
  • Self-centering 3-jaw universal lathe chuck TOS IUG , DIN6350

    Self-centering 3-jaw universal lathe chuck TOS IUG , DIN6350

    Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243809 / DIN 6350 Clamping: M2 (from the front side of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

    Price - On request
  • Self-centering 4-jaw universal lathe chuck KUS M1 , Kovonastroje

    Self-centering 4-jaw universal lathe chuck KUS M1 , Kovonastroje
    Recommended ✓

    Four-jaw lathe scroll chuck / universal chuck with set of outer OJS and inner IJS jaws and handle Diameter: according to the selected variant Clamping : M1 (from the back of the chuck) Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

    from 160,29 € with VAT
  • Self-centering 4-jaw universal lathe chuck TOS IUS , CSN 243801

    Self-centering 4-jaw universal lathe chuck TOS IUS , CSN 243801

    Four-Jaw Lathe Chuck / Universal with a set of outer SCV and inner SCN jaws and a loop Diameter: according to the selected variant Clamping: M1 (from the back of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

    from 237,15 € with VAT
  • Self-centering 4-jaw universal lathe chuck TOS IUG , DIN6350

    Self-centering 4-jaw universal lathe chuck TOS IUG , DIN6350
    Clearance sale

    Four-Jaw Lathe Chuck / Universal with a set of outer SCV and inner SCN jaws and a loop Diameter: according to the selected variant Standard: ČSN 243809 / DIN 6350 Clamping: M2 (from the front side of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

    from 299,93 € with VAT
  • Independent Face Plate LUD , Kovonastroje

    Independent Face Plate LUD , Kovonastroje

    Four-jaw Face Clamping Plate - LUD with independently adjustable jaws / 4-jaw non-concentric chuck Diameter: according to the selected variant Board body: ductile iron Clamping: see photo, possibly attached catalog sheet Other dimensions - see the attached catalog sheet in PDF. Each jaw can be tightened separately. It is a four-jaw chuck, in which clamping of the workpiece is ensured by independent movement of the jaws using a trapezoidal screw that engages with this jaw. Used for clamping material of irregular shape. The jaws can be rotated and tightened independently. We recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. The face plate is delivered in a paper box with Czech instructions.

    from 91,74 € with VAT
  • Universal manual hobby 3-jaw chuck KUX, Metal tools

    Universal manual hobby 3-jaw chuck KUX, Metal tools

    Small Three Jaw Lathe Chuck / Pinionless Universal with Hard Reverse Jaws Diameter: according to the selected variant Clamping: M3 or behind the thread - see product description for individual variants Additional dimensions and parameters - see the attached PDF Steel body We recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. Usage: - for machining wood, plastics and similar soft materials - for grinding spiral drills and other cutting tools

    from 105,96 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Universal chucks and acc.