Machine vices
-
Clamping screw set for vice 2SN-100-80-270-35
Set of 4 clamping screws with T-nut (see photo) T-Nut : T18 mm (width of the upper part of the nut) Screw : M16 If you need another assembly of screws with T-nuts, let us know - we will replace according to your needs (eg. T14/M12, T20/M16, T22/M16, etc.)
On request31,64 € with VAT -
Locking pin for vice VNC-160H - position no.6
Locking pin for sliding jaw - for vice VNC-160H Position: No.6 Diameter of pin: 20mm Diameter: 22mm Diameter: 17mm Total length: 150mm If you have bent this pin, it is because the vise has been pulled above the maximum permissible tightening force. We recommend purchasing a pressure gauge for the vise and setting the vise stop to the maximum permitted tightening force. Attention - this bolt was made in the Czech Republic from quality steel - it is not an original manufacturer's bolt. It is quite probable that if you continue to pull the vise, you will not bend this pin anymore = it can loosen the vice and damage something else. © ho.
In stock24,26 € with VAT -
Positioning clamping jig - 4 axes for milling machine, grinder, drill
4-axis clamping tool, originally used as a stonecutter / square tool sharpening machine Clamping head: Max. height 37mm Length: 76mm Depth: 20mm < Max. product height: 225mm Base: 140x200 Clamping grooves (pitch 52mm): 4x M10, incl. stones Usage: Clamps for machining total setting in four axes In the lower part there is a horizontal turntable with a division of 0-360 °, a vertical turntable 90-0-90 ° above it, a horizontal turntable 0-360 °. The clamping head is clamped on a vertical rotary hitch enabling 90 ° to 90 ° rotation.
In stock240,55 € with VAT -
Precise modular vice 100mm with two movable jaws
Clearance saleDouble precision machine modular vice 100 mm Jaw width: 100mm Jaw height: 30mm Opening: 290mm Vibrating dimensions: 460x100mm (length x width) Hardened and Workpiece HRC 58 - 62 Material: Alloy Tool Steel Flatness: 0,005mm / 100mm
On request801,84 € with VAT