Machine vices

Product count: 59
  • Quick-release machine vice, type VQS, VERTEX

    Quick-release machine vice, type VQS, VERTEX
    Recommended ✓

    Mechanical vise with quickly adjustable jaw Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants Suitable under milling machine, sander, precision milling

    from 219,57 € with VAT
  • Precision machine vice with large opening, type VJ, VERTEX

    Precision machine vice with large opening, type VJ, VERTEX
    Recommended ✓

    Brand precision machine vise with precision and large opening. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or see the attached catalog sheet The prismatic jaw can be purchased additionally - see related products Possible clamping with or without a wheel - both surfaces ground.

    from 359,94 € with VAT
  • Machine vice CSN 243135 / CSN 243136

    Machine vice CSN 243135 / CSN 243136
    Recommended ✓

    Machine vise with movable jaw - with grooved jaws ČSN 243135 for rigid and precise clamping of the workpiece Width of the jaws: according to the selected variant Height of the jaws (after the bed): according to the selected variant, or see the product description for the individual variants Other dimensions - see product description for individual variants Perpendicularity - parallelism of functional surfaces: 0.02 / 100 mm Standard: ČSN 243135 (125mm and 160mm), ČSN 243136 (200mm) Material: Body: ductile iron with min. tensile strength 400MPa Jaws: steel 14220.4, hardness 56+2 HRC

    from 657,24 € with VAT
  • Machine vise with rotating base, type VBV, VERTEX

    Machine vise with rotating base, type VBV, VERTEX

    Rotating machine vice with full bed and groove for draining liquid Width of the jaws: according to the selected variant Revolving range: 360° Other dimensions - see attached catalog sheet or product description for individual variants Possible clamping with or without a wheel - both surfaces ground.

    from 211,19 € with VAT
  • Machine vise rotatable with tilting in 3 axes, type VW, VERTEX

    Machine vise rotatable with tilting in 3 axes, type VW, VERTEX

    Branded vise with tilting in three axes. Rotatable, foldable. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The vise can be rotated 360° on the base. Vise tilt 0-90° horizontally and 0-45° vertically.

    from 396,40 € with VAT
  • Swivel folding machine vice, type VWT, VERTEX

    Swivel folding machine vice, type VWT, VERTEX

    Tilting 2-axis tilting rotary machine vise with precision base Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Scale on both axes - see attached photo

    from 627,81 € with VAT
  • Comb vice 250mm, opening 550mm CSN 243145, Michalovce

    Comb vice 250mm, opening 550mm CSN 243145, Michalovce
    Clearance sale

    Machine comb vise, quality production - Michalovce Jaw width: 250mm Jaw height: 100mm The sliding jaw is tiltable and adjustable - comb bed. Maximum opening: 550mm Total length of the vise: 800mm Total height of the vise: 200mm ČSN 243145 The movable jaw is swingable by 15° to both sides from the longitudinal axis. Packaged in a beautiful wooden case. The vise is without a handle. Weight on request.

    from 836,79 € with VAT
  • Hydraulic machine vice with rotating base, type VH, VERTEX

    Hydraulic machine vice with rotating base, type VH, VERTEX

    Branded machine vice with wheel drive and hydraulic pressure. Width of the jaws: according to the selected variant Other dimensions - see attached photos or product description for individual variants. The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

    from 523,39 € with VAT
  • Hydraulic machine vice, type VHO, VERTEX

    Hydraulic machine vice, type VHO, VERTEX
    Recommended ✓

    Machine vise with hydraulic pressure Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The wedge mechanism of the jaws pushes the clamped workpiece down - the jaws do not "lift"!!! Accuracy up to 0.01mm The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. The vise bed is hardened to 45 HRC Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Guide stones and clamping screws are not part of the package.

    from 807,06 € with VAT
  • Hydraulic machine vice, swivel and rotatable, type VHT, VERTEX

    Hydraulic machine vice, swivel and rotatable, type VHT, VERTEX

    Rotating tiltable machine vice with tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description of the individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

    from 1.123,55 € with VAT
  • Rotating hydraulic machine vice with transverse tilting, type VHT, VERTEX

    Rotating hydraulic machine vice with transverse tilting, type VHT, VERTEX

    Rotating tilting machine vice with lateral tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

    from 727,20 € with VAT
    up to -30%
  • NC hydraulic machine vice, type VNC, VERTEX

    NC hydraulic machine vice, type VNC, VERTEX
    Recommended ✓

    Branded CNC machine vise with hydraulic pressure. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The opening can be adjusted using a pin to 4 positions - see the attached catalog sheet The clamping stop (clamping force) can be adjusted - there is a ring with a scale on the handle, which can be pushed against the vise by loosening two Allen screws and thus always achieve a constant tightening force for all workpieces. We recommend purchasing a pressure gauge with the vise, thanks to which you can always adjust the clamping force as needed. The screw is encapsulated -> protection against dust, chips and dirt. The vise bed is open. The body is made of high-quality and highly resistant ductile cast iron FCD60 Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.

    from 882,88 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Machine vices