With soldered wafer (classic)

Product count: 62
  • Inner corner turning knife DIN 4974 L / CSN 223727

    Inner corner turning knife DIN 4974 L / CSN 223727
    Clearance sale

    Corner turning knife with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223727 / CSN 22 3727, DIN4974, DIN4974L, ISO9 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,39 € with VAT
  • Parting off turning tool DIN 4981 R / CSN 223730

    Parting off turning tool DIN 4981 R / CSN 223730
    Clearance sale

    External grooving lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223730 / CSN 22 3730, DIN4981, DIN4981R, ISO7 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 1,86 € with VAT
  • Parting off turning tool DIN 4981 R / CSN 223730 , DENAS

    Parting off turning tool DIN 4981 R / CSN 223730 , DENAS

    External grooving lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223730 / CSN 22 3730, DIN4981, DIN4981R, ISO7 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,83 € with VAT
  • Parting off turning tool DIN 4981 L / CSN 223731

    Parting off turning tool DIN 4981 L / CSN 223731
    Clearance sale

    External grooving lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223731 / CSN 22 3731, DIN4981, DIN4981L, ISO7 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 2,80 € with VAT
  • Parting off turning tool DIN 4981 L / CSN 223731 , DENAS

    Parting off turning tool DIN 4981 L / CSN 223731 , DENAS

    External grooving lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223731 / CSN 22 3731, DIN4981, DIN4981L, ISO7 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,83 € with VAT
  • Carbide tipped tool bit DIN282-60 R / CSN 223770

    Carbide tipped tool bit DIN282-60 R / CSN 223770
    Clearance sale

    External thread turning lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223770 / CSN 22 3770, DIN282 - 60 R, ISO13 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 2,89 € with VAT
  • Carbide tipped tool bit DIN282-60 R / CSN 223770 , DENAS

    Carbide tipped tool bit DIN282-60 R / CSN 223770 , DENAS

    External thread turning lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223770 / CSN 22 3770, DIN282 - 60 R, ISO13 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 7,74 € with VAT
  • Carbide tipped tool bit DIN282-60 L / CSN 223771

    Carbide tipped tool bit DIN282-60 L / CSN 223771
    Clearance sale

    External thread turning lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223771 / CSN 22 3771, DIN282 - 60 L, ISO13 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,15 € with VAT
  • Carbide tipped tool bit DIN282-60 L / CSN 223771 , DENAS

    Carbide tipped tool bit DIN282-60 L / CSN 223771 , DENAS

    External thread turning lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223771 / CSN 22 3771, DIN282 - 60 L, ISO13 L Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 7,74 € with VAT
  • Internal thread turning knife DIN 283 R / CSN 223773

    Internal thread turning knife DIN 283 R / CSN 223773
    Clearance sale

    Internal thread turning lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223773/22 3773, DIN283 R, ISO14 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,17 € with VAT
  • Internal thread turning knife DIN 283 R / CSN 223773, DENAS

    Internal thread turning knife DIN 283 R / CSN 223773, DENAS

    Internal thread turning lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223773/22 3773, DIN283 R, ISO14 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 10,27 € with VAT
  • Inner grooving tool bit DIN263 / ISO11

    Inner grooving tool bit DIN263 / ISO11

    Internal grooving lathe with soldered blade for parting holes Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: DIN 263, ISO 11 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,37 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

With soldered wafer (classic)