Homepage Metalworking tools Turning Dead and live centers

Dead and live centers

Product count: 96
  • Live center with Morse taper, 3 bearings

    Live center with Morse taper, 3 bearings

    Morse clamping cone Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 22,42 € with VAT
  • Live center 60° - CSN 243324

    Live center 60° - CSN 243324

    Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

    from 79,70 € with VAT
  • Live center with offset tip, 3 bearings

    Live center with offset tip, 3 bearings

    Morse clamping cone with extended offset tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 24,96 € with VAT
  • Extended live center

    Extended live center

    Morse clamping cone with extended tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 39,25 € with VAT
  • Carbide-tipped live center

    Carbide-tipped live center

    Morse clamping cone with carbide tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

    from 36,41 € with VAT
  • Live center with enlarged head, type VLC, VERTEX

    Live center with enlarged head, type VLC, VERTEX

    Centering rotary tip with enlarged head Clamping Morse cone: according to the selected variant Other dimensions - see the attached catalog sheet Tip angle: 60° - 90° - see attached catalog sheet Material: alloyed tool steel, HRC 50

    from 92,18 € with VAT
  • Dead center 60° DIN806 / CSN 243310

    Dead center 60° DIN806 / CSN 243310

    Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN806 / DIN 806 / replacement ČSN 243310 / CSN 243310

    9,58 € with VAT
  • Dead center 60° CSN 243310 , Skoda

    Dead center 60° CSN 243310 , Skoda
    Clearance sale

    Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243310 / CSN 243310 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.

    from 11,74 € with VAT
  • Live center 60° - CSN 243324 , Skoda

    Live center 60° - CSN 243324 , Skoda

    Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

    from 96,16 € with VAT
  • Live center 90° - CSN 243324 , Skoda

    Live center 90° - CSN 243324 , Skoda

    Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

    from 149,63 € with VAT
  • Dead center 60° CSN 243310 , Karned

    Dead center 60° CSN 243310 , Karned

    Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243310 / CSN 243310

    from 16,63 € with VAT
  • Extended live center for NC machines , CSN 243327 , Skoda

    Extended live center for NC machines , CSN 243327 , Skoda

    The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.

    from 148,41 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Dead and live centers