Welding

Replacement External Cover Cover / Mica for ADF-600 Hood from our Offer Width 111mm Height 90mm Strength 1mm

Replacement inner cover mantle for ADF-600 hood from our offer Width 105mm Height 47mm Strength 1mm

Professional pneumatic milling machine / drill / drill for spot welds, suitable for example. for drilling spot welds and other milling work - high power, lower air consumption and noise Speed: 1400 rpm Drill / cutter for: 8mm Air consumption: 0.4 m3 / min Maximum pressure: 6.2 bar Total length: 310mm Inlet fitting: 1/4 " Min. Air hose diameter: 6.5mm Noise: 77dBA Vibration:

Replacement drill for spot weld drill GP-921C Diameter: 8mm

Rotary positioner / rotary table for cooking After gripping the welded object on the plate( into the chuck - not included You can set the object to the desired position and change it during welding. Possibility of setting: the speed of rotation of the object in the range of 1-12 rpm. Automatic rotation by pre-selected angle Possibility to change positions to horizontal or vertical Operating voltage: 230V Diameter turns: 300mm Rotation speed: 1-12rpm. Max.load of table in horizontal position: 50kg Max.load of table in vertical position: 25kg Size of positioner: 490x440x460mm Weight 36kg Diameter hole with diameter: 40mm There are 3 grooves of 120 ° in the table: width 12mm, length 64mm 2 triple threaded holes for catching glass

Rotary positioner / rotary table for cooking After gripping the welded object on the plate(into the chuck - not included) Â!Vky) you can set the object to the desired position and change it during welding. Possibility of setting: the speed of rotation of the object in the range of 0.2-2 rpm. Automatic rotation by pre-selected angle Possibility to change positions to horizontal or vertical Operating voltage: 230V Diameter turns: 350mm Rotation speed: 0.2-2 rpm. Max.load of table in horizontal position: 100kg Max.load of table in vertical position: 50kg Size of positioner: 540x440x475mm Weight 45kg Centering hole diameter: 50mm

Rotary positioner / rotary table for cooking After gripping the welded object on the plate(into the chuck - not included) Â!Vky) you can set the object to the desired position and change it during welding. Possibility of setting: the speed of rotation of the object in the range of 0.2-2 rpm. Automatic rotation by pre-selected angle Possibility to change positions to horizontal or vertical Operating voltage: 230V Diameter turns: 450mm Rotation speed: 0.2-2 rpm. Max. table load in horizontal position: 300kg Max. table load in vertical position: 150kg Positioner size: 740x480x530mm Weight 58kg Centering hole diameter: 50mm

Face gauge gauge Double sided scale in the range 0-15 Gauge size 65x33mm

Conical joint gauge for welds, for gaps between sheets, between welded surfaces, etc. Range: 0.5-11 mm Division: 0.1 mm

Digital magnetic spirit level with IP65 protection Absolute and relative measurement, 4 work surfaces The display flips according to the position of the device. Resolution 0.1 ° Accuracy 0.1 ° for 0-90 ° and up to 0.2 ° for> 90 °. Calibration is performed by pressing the ON / OFF button while turning it on until the instrument turns off. Then switch it on again, the value "1" lights up. Press the ZERO button, wait 6sec. then turn the inclinometer 180 ° and press ZERO again and wait 6 seconds. You have set absolute zero here and the inclinometer is calibrated.

Digitometer with Magnet / Magnets 0-360 ° Always displayed 0-90 ° angle Dimensions of base: 50x50mm

Pocket digital spirit level 65x50mm with upper libel and magnetic base Leveling digital protractor for fast angle viewing Magnetic base, shutdown when inactivity 5 min, reset button Absolute Zero Absolute Zero Measures Precision 0.1 ° Protractor Dimensions: Length: 51mm Width: 32mm Height: 62mm