Milling supports

Product count: 8
  • Sliding worktop with vernier, type ST/STA, VERTEX

    Sliding worktop with vernier, type ST/STA, VERTEX

    Slide table Model: according to the selected variant Dimensions and parameters - see attached catalog sheet or product description for individual variants Bronze nut, bronze nut feed. Prismatic guide with a demarcation bar and the possibility of arresting the movement. All surfaces sanded. Material: FC-30 Accuracy: 0.01 / 100mm The running surfaces are hardened and precisely ground Usage : - For multi-axis machining - can be used as a base for another axis. - Fixing, for example, to a rotary table, a tilting table, a divider or an angle plate.

    from 323,53 € with VAT
  • Additional support 100x150, SE-100

    Additional support 100x150, SE-100

    Additional support - milling support, lathe support Clamping surface: 100x150mm Axial feed - aligned with base plate: 105mm Axial feed - maximum: 180mm Nonius: 1 piece nonius 0.02mm, 1x turn = 4mm Base: 100x130mm Mounting holes: 4x 10mm, pitch 70mm and 60mm - see attached photo Bronze matrix, feed by bronze matrix. Prismatic guiding with stop bar and trapping capability. Material: FC-30 - Accuracy: 0.01 / 100mm Traveling surfaces are hardened and precisely ground Uses: support lathe. Kat. No. 7002-560

    In stock
    400,84 € with VAT
  • Additional support 150x200, SE-150

    Additional support 150x200, SE-150

    Additional support - milling support, lathe support Clamping area: 150x200mm Axial feed - aligned with base plate: Axial feed - maximum: Vernier: 1 length of vernier 0.02mm, 1x turn = 4mm Base: 150x185mm Mounting holes: 4x 13mm, pitch 110mm and 90mm - see attached photo Bronze nut, feed with bronze nut. Prismatic guide with delimiter bar and feed lock option. Material: FC-30 Accuracy: 0.01 / 100mm The running surfaces are hardened and precisely ground Usage: Mounted on the cross support of the lathe. Contact the Company: Cat. A „. 7002-561

    In stock
    748,24 € with VAT
  • Vise for additional support, jaw 50 mm

    Vise for additional support, jaw 50 mm

    Clamp for additional support Jaw width 50mm Jaw opening 45mm Vise height 25mm Compatible, for example, with the support model LC-00433 from our offer

    In stock
    62,36 € with VAT
  • Additional support 100x125 for hobby lathe

    Additional support 100x125 for hobby lathe

    Additional support - milling support, support for hobby lathes Clamping area: 100x125mm Axial feed - aligned with base plate: 65mm Axial feed - maximum !LnA: 80mm Vernier: 1 length of vernier 0,02mm, 1x turn = 2mm Base: 92x80mm Mounting holes: 2x 10mm, pitch 41mm T-grooves: 3x T10, pitch 40mm Bronze nut, feed bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.

    On request
    140,30 € with VAT
  • Additional support 50x90 for hobby lathe

    Additional support 50x90 for hobby lathe

    Additional support - milling support, support for hobby lathes Clamping area: 50x90mm Axial feed - aligned with base plate: 30mm Axial feed - maximum f!LnAf: 54mm Vernier: 1 length of vernier 0,03mm, 1x turn = 1,5mm Base: 57x50mm Mounting holes: 2x 5mm, pitch 22mm T-grooves: 3x T5,5, pitch 25,5mm 2x T4 on the sides Part is a simple clamping plate. Bronze nut, feed with bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.

    On request
    74,68 € with VAT
  • Milling support for lathe 70x150mm for MN80

    Milling support for lathe 70x150mm for MN80

    Milling support for lathe Clamping surface 70x150mm Axial displacement about 80mm 1 piece nonius 0,02mm, 1x turn = 1mm Slot: 3xT10 Distance from rear edge to axis hole: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking base Adjustable axial clearance of the bolt bearing The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped Material: Angle holder and T-slot table is made of CG25 gray cast iron Nonius, crank and fastener is made of steel Feed screw is made of strong steel < br> Usage: MN80 lathe, or even for other lathes. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

    In stock
    508,77 € with VAT
  • Milling support for lathe 70x150mm

    Milling support for lathe 70x150mm

    MN80 Lathe Milling Machine Lathe Chinese Clamping surface 70x150mm Axial displacement approx. 80mm 1 piece nonius 0,02mm, 1x turning = 1mm Slot: 3xT10 Distance from the rear edge to the hole axis: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking system Adjustable axial clearance of the bolt bearing The surfaces of the product are carefully angled and ground, all sliding function surfaces are scraped Material: Angle holder and T-shaped table with C-25 gray cast iron Nonius, handle and fastener is made of steel Screw feed is of strength steel Usage: MN80 lathe, or even for other lathes. If you want to use support on another lathe (Rotwerk, Asist, Proma, Quantum, Bernardo and others), please send us a dimensioned drawing of your lathe's knife holder. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

    On request
    508,77 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Milling supports