Reaming and drilling
-
Roughing reamer with cylindrical shank DIN344 / CSN 221480 , StimZet
Machine drill with cylindrical shank, with three cutting edges Average: according to the selected variant Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Standard: ČSN 221480 / CSN 22 1480 / DIN344 / DIN 344 / ISO 7079 Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.
from 14,11 € with VAT -
Drill with taper shank ČSN 221411, Zbrojovka
Clearance saleMachine drill with taper shank, with four cutting edges Average: according to the selected variant Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining Short cutting edge design. Other dimensions - see product description for individual variants Material: HSS - high-performance high-speed steel Standard: ČSN 221411 / CSN 22 1411 / DIN222 / DIN 222 / ISO 3314 Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.
from 6,18 € with VAT -
Drill with taper shank ČSN 221411, Stimzet
Machine drill with taper shank, with four cutting edges Average: according to the selected variant Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Standard: ČSN 221411 / CSN 22 1411 / DIN222 / DIN 222 / ISO 3314 Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.
from 5,49 € with VAT -
Socket drill bit DIN222 / CSN 221414 , Zbrojovka
Clearance saleSocket drill with four cutting edges Average: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining. Method of drill production: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) Holders ČSN 241210 (DIN 217) Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. The drills are made in the Czech Republic, unused, they come from excess stock. Only a limited selection.
from 44,01 € with VAT -
Socket drill bit DIN222 / CSN 221414 , Stimzet
Socket drill with four cutting edges Average: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining. Method of drill production: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) Holders ČSN 241210 (DIN 217) Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.
from 37,81 € with VAT -
Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Zbrojovka
Clearance saleHand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.
from 0,97 € with VAT -
Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Stimzet
Hand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.
from 0,67 € with VAT -
Manual adjustable reamer - substitute of CSN 221424 , YATO
Adjustable reamer - manual - without guide bush Range: according to the chosen variant Standard: without standard, replacement for ČSN 221424 Manual adjustable reamers are ONLY suitable for through holes. The cutting edges ream gradually (conical hole), ie the set diameter will not be reamed until the reamer passes the cutting edges through the hole. Adjustable reamers are used in finishing machining operations with cylindrical holes. Reamed holes have a precise size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set size is measured via a pair of opposing knives. The commonly supplied knife geometry is suitable for machining gray cast iron and bronze.
from 15,67 € with VAT -
Adjustable reamer CSN 221424 , Narex
Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Scope: according to the selected variant Dimensions: see product description for individual variants or see attached catalog sheet Standard: ČSN 221424 Hand adjustable reamers are ONLY suitable for through holes. The blades are reamed gradually (conical hole), i.e. the set diameter will only be reamed when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.
from 128,30 € with VAT -
Machine reamer with cylindrical shank ČSN 221430 , Zbrojovka
Clearance saleMachine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. standards: ČSN 221430 / CSN 22 1430 / DIN212 Form B, D (ISO521) Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.
from 9,92 € with VAT -
Machine reamer with cylindrical shank DIN212 / CSN 221430 , Stimzet
Machine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. standards: ČSN 221430 / CSN 22 1430 / DIN212 Form B, D (ISO521) Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. If you haven't found the reamer you're looking for, type or call, we'll check.
from 13,58 € with VAT -
Reamer for small holes with cylindrical shank CSN 221418, Zbrojovka
Clearance saleReamer for small holes, cylindrical shank Dimension and tolerance: according to the selected variant Other dimensions - see product description for individual variants Teeth in the left helix Material: HSS Standard: ČSN 221418 / CSN 22 1418 Usage: for materials with long chips, steel up to 500N/mm2, copper, aluminum, plastics Czech production, unused - excess stock If you need an NC reamer made of cobalt steel for reaming ordinary steel (800MPa), stainless steel or harder steel, ask us, we will be happy to offer.
from 1,91 € with VAT