Řezné oleje, tuky a odlučovače

Machine separator / leather belt and timer filter - for clean, free oil, type HD-800 separation unit. The oil is then drained from the unit through the outlet - a rubber hose. This separator has a 24-hour timer that allows repeated automatic start-up as needed. Highest efficiency of free oil drain. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Special Leather Belt with Long Life, Heat and Chemical Resistant Parameters: Belt Width: 39mm Belt Length (Total): 800mm Band length (functional part): 2x225mm Diameter hose: 22mm Length of hose: 600mm Maximum filtration: 4litres per hour Dimensions (WxHxD): 102x153x190 (see attached photo) Power supply: 220V Clamping: 2 2 M6 screw holes in the front and rear 2 2 The drain hose is slid from the rear to the hose nipple Usage: For the economical removal of free oil from the machine or tools. Ref. No .: 2020-100

Belt width: 39mm Belt length (total): 800mm

HD-810, . The oil is then drained from the unit through the outlet - a rubber hose. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Special Leather Belt with Long Life, Heat and Chemical Resistant Parameters: Belt Width: 39mm Tape Length (Total): 550mm Band length (functional part): 2x90mm Diameter hose: 22mm Hose length: 600mm Maximum filtration: 4litres per hour Dimensions (WxHxD): 102x138x150 (see enclosed photo) Power supply: 220V Application: For economical removal of free oil from machine parts or tools. Ref. No .: 2020-101

Belt width: 39mm Tape length (total): 550mm

After removing the rubber cord into an oil pan (or a liquid bath) - rubber hose. This separator has a 24-hour timer that allows repeated automatic start-up as needed. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Parameters: Hose diameter: 22mm Length of hose: 150mm < - oil from containers and oil vats. Ref. No .: 2020-102

Spare Dumbbell Strand / Rope Long Durable Rubber Strap, Heat and Chemical Resistant Diameter: 4,5mm Length (total): 900mm

HD-830 Oil Separator / Rubber Rope Filter Unit - Oil, Type HD-830 After immersing the rubber rope in an oil pan (or liquid bath) hose. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Parameters: Hose diameter: 22mm Length of hose: 150mm < - < oil from containers and oil vats. Ref. No .: 2020-103

Separating unit / filter unit with stainless steel disc - for oil After inserting the machine or metal disc tool, oil is drained and discharged into the container. Economic solution in the consumption of cutting fluid - oils. There is also a water and oil tank (see enclosed photo). Parameters: Blade diameter: 300mm Maximum filtration: 1 liter per hour Dimensions (WxHxD): 337x274x479 (see attached photo) Power supply : 220V Usage: For the economical removal of oil from machine parts or tools. Ref. No .: 2020-104

Powerful cutting oil for normal structural steels and non-ferrous metals. dilutable: = 5% oil for normal structural steel and non-ferrous metals Home oil = 10% for higher strength steel and stainless steel Home for heavy duty machining oil can be added to mix up to 50% water

Powerful cutting oil for normal structural steels and non-ferrous metals, 2.5 liter packaging Prevents corrosion Does not contain any heavy metals Free of nitrate and chlorine Also suitable for applications with minimal lubrication. Dilutable with water: 5% oil = for common structural steels and non-ferrous metals 10% oil = for steels with higher strength and noble © steels With increasing demands on machinability, increase the dilution ratio - possibly only after use without dilution with water. * Always pour oil into water, never the other way around! Usage: cutting, milling, grinding, drilling and cutting threads

Powerful cutting oil in spray for machining all steels and non-ferrous metals. No compressed gas with a hand pump.

Universal use. Suitable for steel, stainless steel, poorly machinable materials, non-ferrous metals such as aluminum, copper, brass. The wax holds well on the tool, does not drip or spray like ordinary cutting oils Ideal for working in difficult positions (above the head, etc.) Chlorine free Usage: cutting, drilling, threading and grinding of all common steels. Also suitable for machining hard-to-machine materials such as titanium, manganese steel, cast steel, chrome-nickel or molybdenum steel, non-ferrous steels such as aluminum, copper and brass.