Reamers

Product count: 37
  • Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Stimzet

    Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Stimzet

    Hand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 252,04 € with VAT
  • Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Zbrojovka

    Hand reamer with cylindrical shank - DIN206B / CSN 221420 , Zbrojovka
    Clearance sale

    Hand reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS Standard: ČSN 221420 / CSN 22 1420 / DIN 206 Form B (ISO 236) Application: Reaming of through holes in repairs and piece production for all non-ferrous and ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 79,86 € with VAT
  • Manual adjustable reamer - substitute of CSN 221424 , YATO

    Manual adjustable reamer - substitute of CSN 221424 , YATO

    Adjustable reamer - manual - without guide bush Range: according to the chosen variant Standard: without standard, replacement for ČSN 221424 Manual adjustable reamers are ONLY suitable for through holes. The cutting edges ream gradually (conical hole), ie the set diameter will not be reamed until the reamer passes the cutting edges through the hole. Adjustable reamers are used in finishing machining operations with cylindrical holes. Reamed holes have a precise size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set size is measured via a pair of opposing knives. The commonly supplied knife geometry is suitable for machining gray cast iron and bronze.

    from 456,90 € with VAT
  • Machine reamer with cylindrical shank DIN212 / CSN 221430 , Stimzet

    Machine reamer with cylindrical shank DIN212 / CSN 221430 , Stimzet

    Machine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. standards: ČSN 221430 / CSN 22 1430 / DIN212 Form B, D (ISO521) Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 332,02 € with VAT
  • Machine reamer with cylindrical shank ČSN 221430 , Zbrojovka

    Machine reamer with cylindrical shank ČSN 221430 , Zbrojovka
    Clearance sale

    Machine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. standards: ČSN 221430 / CSN 22 1430 / DIN212 Form B, D (ISO521) Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 121,00 € with VAT
  • Machine reamer with taper shank DIN208B / CSN 221431, StimZet

    Machine reamer with taper shank DIN208B / CSN 221431, StimZet

    Machine reamer for holes (holes), conical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS or HSSCo5 - according to the selected variant Teeth in left helix 7 ° with even pitch. Standard: ČSN 221431 / CSN 22 1431 / DIN208 / DIN 208 B / ISO 521 Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 489,57 € with VAT
  • Machine reamer with taper shank DIN208B / CSN 221431, Zbrojovka

    Machine reamer with taper shank DIN208B / CSN 221431, Zbrojovka
    Clearance sale

    Machine reamer for holes (holes), conical shank Size and tolerance: according to the chosen variant Material: HSS Teeth in left helix 7 ° with even pitch. Standard: ČSN 221431 / CSN 22 1431 / DIN208 / DIN 208 B / ISO 521 Application: The tool is designed for machine reaming of holes in ferrous and non-ferrous metals, their alloys and non-metallic materials. Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 182,71 € with VAT
  • Plug-in reamer with helical teeth DIN219B / CSN 221432, Zbrojovka

    Plug-in reamer with helical teeth DIN219B / CSN 221432, Zbrojovka
    Clearance sale

    Machine insert reamer for holes ( holes ) Dimensions and tolerance: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS The teeth are in a left helix 7° Clamping hole with taper 1:30 Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 For clamping, holders are used: ČSN 241210 / DIN 217 Use: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastic materials. The reamers are Czech-made, unused, from over-standard stock. Only a limited selection. If you did not find the reamer you were looking for, write or call and we will check.

    from 550,55 € with VAT
  • Plug-in reamer with helical teeth DIN219B / CSN 221432, Stimzet

    Plug-in reamer with helical teeth DIN219B / CSN 221432, Stimzet

    Machine plug-in reamer for holes (holes) Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS The teeth are in the left helix 7 ° Clamping hole with 1:30 taper Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 1.749,90 € with VAT
  • Machine NC reamer HSSE with cylindrical shank DIN212B, BLICKLE

    Machine NC reamer HSSE with cylindrical shank DIN212B, BLICKLE

    Machine reamer for holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Material: HSSE Standard: DIN 212 B

    from 454,11 € with VAT
  • Plug-in reamer with straight teeth DIN219A / CSN 221447 , Zbrojovka

    Plug-in reamer with straight teeth DIN219A / CSN 221447 , Zbrojovka
    Clearance sale

    Machine plug-in reamer for holes (holes) with straight cutting edges Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS Clamping hole with 1:30 taper Blades with uneven spacing Standard: ČSN 221447 / CSN 22 1447 / DIN219A / DIN 219 A / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Not suitable for reaming holes with longitudinal grooves! Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

    from 1.046,65 € with VAT
  • Plug-in reamer with screwed knives DIN220 / CSN 221435 , Zbrojovka

    Plug-in reamer with screwed knives DIN220 / CSN 221435 , Zbrojovka
    Clearance sale

    Machine plug-in reamer for holes (holes) with screwed teeth (teeth according to ČSN 221435.1) Size and tolerance: according to the chosen variant Clamping hole with 1:30 taper Teeth with uneven spacing Material: HSS The body of the reamer is made of structural steel. Standard: ČSN 221435 / CSN 22 1435 / DIN 220 / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection.

    from 965,58 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Reamers