Homepage Metalworking tools Reaming and drilling

Reaming and drilling

Product count: 59
  • Hand taper reamer 1:50 HSSCo5 DIN9A / CSN 221469 A , Stimzet

    Hand taper reamer 1:50 HSSCo5 DIN9A / CSN 221469 A , Stimzet

    Cone reamer 1:50, teeth straight Size: according to the chosen variant Form: A - straight teeth Shank: cylindrical with square Material: HSS Co5 - High speed steel + 5% cobalt Standard: ČSN 221469A / CSN 22 1469 A / DIN9A / DIN 9 A / ISO 3465 Usage: For manual and machine reaming of holes for taper pins 1:50

    from 36,30 € with VAT
  • Taper hand reamer 1:10 HSS CSN 221460, StimZet

    Taper hand reamer 1:10 HSS CSN 221460, StimZet

    Taper reamer 1:10, straight teeth with even pitch Size: according to the chosen variant Other dimensions - see enclosed catalog sheet Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221460 / CSN 221460 Usage: For manual and machine reaming of cavities for tapered shaft ends 1:10

    from 41,44 € with VAT
  • Hand taper reamer 1:50 HSS DIN9B / CSN 221469 B , StimZet

    Hand taper reamer 1:50 HSS DIN9B / CSN 221469 B , StimZet

    Taper reamer 1:50 , teeth in left helix 7 ° Size: according to the chosen variant Form: B Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221469B / CSN 22 1469 B / DIN9B / DIN 9 B / ISO 3465 Usage: For manual and machine reaming of holes for taper pins 1:50

    from 29,15 € with VAT
  • Carbide reamer with cylindrical shank VR301 , VERTEX

    Carbide reamer with cylindrical shank VR301 , VERTEX

    Carbide machine hole reamer, cylindrical shank Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Standard: no standard Design: Diameter 2.0 to 9.0 mm - carbide monolith Diameter 10.0 to 20.0 mm - brazed carbide cutting edges Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys

    from 41,14 € with VAT
  • Carbide reamer with cylindrical shank , type 6301

    Carbide reamer with cylindrical shank , type 6301

    Machine carbide reamer for holes (holes), cylindrical shank with carbide SK cutting edges, straight teeth Size and tolerance: according to the chosen variant Other dimensions - see descriptions of individual variants Tvrdokov: K10 Reamer body: tool steel Standard: ČSN 221370 / CSN 22 1370 / DIN 8050/6301 Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys Main use: Steel with strength up to 1000N / mm2 Stainless steel Cast iron Aluminum Heat-resistant steel (titanium, etc.) Usable: Steel with strength up to 500N / mm2 Steel with strength up to 1400N / mm2 Copper

    from 63,11 € with VAT
  • Carbide reamer with cylindrical shank , type 6301

    Carbide reamer with cylindrical shank , type 6301

    Machine carbide reamer for holes (holes), morse shank with carbide SK cutting edges, straight teeth Size and tolerance: according to the chosen variant Other dimensions - see descriptions of individual variants Tvrdokov: K10 Reamer body: tool steel Standard: ČSN 221371 / CSN 22 1371 / DIN 8050/6311 Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys Main use: Steel with strength up to 1000N / mm2 Stainless steel Cast iron Aluminum Heat-resistant steel (titanium, etc.) Usable: Steel with strength up to 500N / mm2 Steel with strength up to 1400N / mm2 Copper We can offer other dimensions and tolerances within custom production - contact us.

    from 31,56 € with VAT
  • Solid carbide reamer with cylindrical shank DIN8093 A

    Solid carbide reamer with cylindrical shank DIN8093 A

    All-carbide machine VHM / TK / SK reamer of holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions: see enclosed catalog sheet Standard: DIN8093 / DIN 8093, form A Design: Diameter 2.0 to 20.0 mm - carbide monolith Usage: Steel up to 48 HRC For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys If you did not find the average / tolerance you were looking for, write to us - we can offer custom production.

    from 43,75 € with VAT
  • Solid carbide reamer with cylindrical shank DIN8093 B

    Solid carbide reamer with cylindrical shank DIN8093 B

    All-carbide machine VHM / TK / SK reamer of holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions: see enclosed catalog sheet Standard: DIN8093 / DIN 8093, form B Design: Diameter 2.0 to 20.0 mm - carbide monolith Usage: Steel up to 48 HRC For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys If you did not find the average / tolerance you were looking for, write to us - we can offer custom production.

    from 40,45 € with VAT
  • Drill bit 10 HSS 3br. with Hi-Tech taper shank

    Drill bit 10 HSS 3br. with Hi-Tech taper shank
    Clearance sale

    Three-edged drill with three blades 10 mm Cone: morse, MK1 Number of edges: 3 Material: HSS - high-performance high-speed steel Tolerances: without specified tolerance Method of drill production: V(grinding) Standard: without standard, replacement for ČSN 221482 / DIN343 RN / ISO235 Application: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. The three-edged design increases the accuracy of the machined holes, especially their roundness.

    In stock
    4,78 € with VAT
  • Drill 14 HSS 3br. with Hi-Tech taper shank

    Drill 14 HSS 3br. with Hi-Tech taper shank
    Clearance sale

    Three-edged drill with three blades 14 mm Cone: morse, MK1 Number of edges: 3 Material: HSS - high-performance high-speed steel Tolerances: without specified tolerance Method drill production: V(grinding) Standard: without standard, replacement for ČSN 221482 / DIN343 RN / ISO235 Application: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. The three-edged design increases the accuracy of the machined holes, especially their roundness.

    In stock
    7,18 € with VAT
  • Adjustable reamer 10.32 - 11.11 mm, ČSN 221424

    Adjustable reamer 10.32 - 11.11 mm, ČSN 221424
    Clearance sale

    Adjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 10,32-11,11 mm Manual reamer revolvers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.

    On request
    21,04 € with VAT
  • Adjustable reamer 12.5 - 14.0 mm, ČSN 221424

    Adjustable reamer 12.5 - 14.0 mm, ČSN 221424
    Clearance sale

    Adjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 12,5-14 mm Revolving hand reamers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.

    In stock
    80,72 € with VAT

Reaming and drilling