Inside - into the hole

Product count: 10
  • Internal turning knife DIN 4973 R / CSN 223724

    Internal turning knife DIN 4973 R / CSN 223724
    Clearance sale

    Internal side / removal side turning knife with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223724 / CSN 22 3724, DIN4973, DIN 4973R, ISO8 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,31 € with VAT
  • Internal turning knife DIN 4973 R / CSN 223724 , DENAS

    Internal turning knife DIN 4973 R / CSN 223724 , DENAS

    Internal side / removal side turning knife with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223724 / CSN 22 3724, DIN4973, DIN 4973R, ISO8 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 6,07 € with VAT
  • Inner corner turning knife DIN 4974 R / CSN 223726

    Inner corner turning knife DIN 4974 R / CSN 223726
    Clearance sale

    Corner turning knife with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223726 / CSN 22 3726, DIN4974, DIN4974R, ISO9 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 3,01 € with VAT
  • Inner corner turning knife DIN 4974 R / CSN 223726 , DENAS

    Inner corner turning knife DIN 4974 R / CSN 223726 , DENAS

    Corner turning knife with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223726 / CSN 22 3726, DIN4974, DIN4974R, ISO9 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 6,12 € with VAT
  • Inner corner turning knife DIN 4974 L / CSN 223727

    Inner corner turning knife DIN 4974 L / CSN 223727
    Clearance sale

    Corner turning knife with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223727 / CSN 22 3727, DIN4974, DIN4974L, ISO9 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 4,39 € with VAT
  • Internal thread turning knife DIN 283 R / CSN 223773

    Internal thread turning knife DIN 283 R / CSN 223773
    Clearance sale

    Internal thread turning lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223773/22 3773, DIN283 R, ISO14 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,18 € with VAT
  • Internal thread turning knife DIN 283 R / CSN 223773, DENAS

    Internal thread turning knife DIN 283 R / CSN 223773, DENAS

    Internal thread turning lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223773/22 3773, DIN283 R, ISO14 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 9,80 € with VAT
  • Inner grooving tool bit DIN263 / ISO11

    Inner grooving tool bit DIN263 / ISO11

    Internal grooving lathe with soldered blade for parting holes Knife size: (clamping height x width): according to the selected variant Groove width: see product description for selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: DIN 263, ISO 11 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

    from 5,34 € with VAT
  • Lathe knife for hole 12x12x80mm P30 automatic ČSN 223824

    Lathe knife for hole 12x12x80mm P30 automatic ČSN 223824

    Corner turning cutter with solder blade for iron 12x12mm Four edges: 12x12 Carbide: P30 / S30 - for turning steel( to steel) Length from the edge to the square attachment: 39mm Total length: 80mm Usage: Into the hole - lateral front removal < br> Right, into a hole with a soldered plate Standard: ÄOSN 223824 / CSN 22 3824

    In stock
    6,27 € with VAT
  • Lathe knife for hole 16x16x100mm H10 CSN 223824

    Lathe knife for hole 16x16x100mm H10 CSN 223824

    Turret lathe cutter cuts with soldered sheet for cast iron 16x16mm four edges: 16x16 Carbide: H10 / S20 - for turning cast iron( to cast iron) Total length: 100mm Usage: Into the hole - side face removal Right, into the hole with soldered blade Standard: ÄOSN 223824 / CSN 22 3824

    In stock
    2,40 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Inside - into the hole