Forming knives and wheels

Product count: 24
  • Slotting groove holder , UT type

    Slotting groove holder , UT type

    Shaping slotting holder / holder for CNC For groove with width / insert size: according to the selected variant Max. depth of cut: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for embossing square, hexagonal and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM or carbide.

    from 218,16 € with VAT
  • Slotting groove holder , UTSZ type

    Slotting groove holder , UTSZ type

    Forming / stlotting grooving holder / holder for shaping / slotting machines For groove with width / insert size: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM or carbide.

    from 158,82 € with VAT
  • Slotting holder for hexagonal profile , UT-HEX type

    Slotting holder for hexagonal profile , UT-HEX type

    Forming / slotting holder / holder for CNC for forming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, square and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM, carbide on request.

    from 257,89 € with VAT
  • Slotting holder for square profile , UT-SQ type

    Slotting holder for square profile , UT-SQ type

    Forming / slotting holder / holder for CNC for forming square / square profiles / square / 4hr. For squares of size: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving grooves, hexagonal and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM, carbide on request.

    from 257,89 € with VAT
  • Slotting groove insert HSSE-PM - tol. H7

    Slotting groove insert HSSE-PM - tol. H7

    Forming insert for UT- Insert width: according to the selected variant Edge tolerance: H7 - for exact dimension see product description within individual variants Version with chamfering: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 45,21 € with VAT
  • Carbide slotting groove insert HSSE-PM - tol. H7

    Carbide slotting groove insert HSSE-PM - tol. H7

    Carbide shaping insert for UT- and UTSZ- holders Insert width : according to the selected variant Edge tolerance : H7 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material : Carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 47,53 € with VAT
  • Slotting groove insert HSSE-PM - tol. P9

    Slotting groove insert HSSE-PM - tol. P9

    Forming insert for UT- Insert width: according to the selected variant Edge tolerance: P9 - for exact dimension see product description within individual variants Version with chamfering: according to the selected variant Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 45,21 € with VAT
  • Carbide slotting groove insert HSSE-PM - tol. Js9 - custom made

    Carbide slotting groove insert HSSE-PM - tol. Js9 - custom made

    Carbide shaping insert for UT- and UTSZ- holders Insert width : according to the selected variant Edge tolerance : Js9 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material : Carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 73,46 € with VAT
  • Slotting groove insert HSSE-PM - tol. C11

    Slotting groove insert HSSE-PM - tol. C11

    Forming insert for UT- holders Insert width : according to the selected variant Edge tolerance: C11 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 45,21 € with VAT
  • Carbide slotting groove insert HSSE-PM - tol. C11

    Carbide slotting groove insert HSSE-PM - tol. C11

    Carbide shaping insert for UT- and UTSZ- holders Insert width : according to the selected variant Edge tolerance : C11 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material : Carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for hits insert can be found in related products.

    from 47,53 € with VAT
  • Slotting groove insert HSSE-PM - tol. D10

    Slotting groove insert HSSE-PM - tol. D10

    Forming insert for UT- holders Insert width : according to the selected variant Edge tolerance: D10 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material: HSSE-PM (sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 45,21 € with VAT
  • Carbide slotting groove insert HSSE-PM - tol. D10

    Carbide slotting groove insert HSSE-PM - tol. D10

    Carbide shaping insert for UT- and UTSZ- holders Insert width : according to the selected variant Edge tolerance : D10 - for exact dimension see product description within individual variants Other dimensions - see enclosed catalog sheet Material : Carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

    from 47,53 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Forming knives and wheels