Vices, dividers and tables

Clamping plate with T grooves for clamping Dimensions: according to the selected variant T-slot: according to the selected variant The plate is used for precise clamping of the object during machining Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.01mm / 300mm Boards are made to order, design the clamping holes and their placement yourself - it will be made according to your drawing.

Stable clamping jaws / free machine jaws / split vice (2 pcs), light design Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants

Stable clamping jaws / free machine jaws / split vice (2 pcs), compared to the FV type, it is a more massive design Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants

Workshop table vise for small work with an anvil Width of the jaws: according to the selected variant Other dimensions - see product description for individual variants Clamping: On the table using a clamp Maximum table strength: 75 mm Jaws made of high quality steel hardened to 52-54 HRC Rotary plate with positioning secured by screws Precise cylindrical guidance Rear door with safety terminals Fixing to the base plate with nuts

Workshop table vise for small work with an anvil Width of the jaws: according to the selected variant Other dimensions - see product description for individual variants Jaws made of high quality steel hardened to 52-54 HRC Rotating plate with positioning screws Precise cylindrical guidance Rotary plate with positioning secured by screws The joint allows tilting the vice ±50° and rotating the vice ±360° Spindle and handles zinc chromated

Universal dividing head, dividing device Axis height: according to the selected variant Chuck (YES/NO): according to the selected variant Division possible in vertical and horizontal position Possibility of continuous folding: -10 to +90° Hardened and ground screw Precision tapered roller bearings Gear ratio 40 : 1 The included dividing discs have the following number of holes: 15 / 16 / 17 / 18 / 19 / 20 / 21 / 23 / 27 / 29 / 31 / 33 / 37 / 39 / 41 / 43 / 47 / 49 For the use of a fixed point with a driver, possibly a flange can be used to fix a universal chuck or a face plate. The support horse is adjustable in a horizontal plane, the possibility of tilting Scope of delivery: Horse Three dividing discs Centering tip

Quality rotary dividing table - dividing table for milling machine - circular table for three-jaw chuck Horizontal and vertical clamping Diameter of the table: according to the selected variant There is a scale of 360° around the circumference of the turntable Other dimensions - see product description for individual variants, or the attached catalog sheet Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones. Vertex table grooves are suitable for clamping 3-jaw chucks, which is ideal for machining rotary parts. In the same way, four-jaw chucks can be easily clamped, which are suitable for machining squares and polygons (which is less common), but at the same time, they have lower accuracy (centering) when machining rotary parts - precisely because of clamping by 4 jaws. For this reason, we recommend always using a 3-jaw chuck - if possible. On the market, you can find similar less precise tables with four grooves, but these are not ideal for clamping 3-jaw and 4-jaw chucks - clamping a chuck that has 3 clamping holes on 4 grooves is complicated - it is necessary to find / make an intermediate flange.

Rectangular angle plate with T grooves for clamping Dimensions of the plate: according to the selected variant T-slot: according to the selected variant The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.02mm / 300mm Flatness of the bearing surface up to 0.01mm / 300mm

Professional massive cast iron rotary circular dividing table - dividing table with chuck for milling machine Possibility of dividing continuously via the screw and vernier, after its disconnection (lever) it is also possible to divide with automatic locking by 15° (24 positions) Diameter of the chuck: according to the selected variant The chuck is rotatable by 360° Other dimensions - see the attached PDF catalog sheet or product description for individual variants There are no additional jaws for the chuck. The package also includes discs for dividing into 2, 3, 4, 6, 8 and 12 positions (or 180°, 120°, 90°, 60°, 45°, 30°) Quick setup, simple operation. Nonius : 1 turn = turn by 4° 1 division = 1´ (one minute of degree) Maximum resolution: 20´´ (20 seconds) The turntable and vernier can be locked in the selected position. The lower landing surface is ground, equipped for storing centering stones.

Rotary dividing table tilting under the milling machine Turntable diameter: according to the selected variant Other dimensions - see product description for individual variants, or the attached catalog sheet Horizontal fixing with the possibility of inclination 0-90°. Scale: 360° The lower landing surface is ground, equipped for storing centering stones. Precise positioning (shooting) with a control wheel with vernier - fine division. It is possible to purchase dividing discs with a ruler. The turntable and vernier can be locked in the selected position. It is fastened to the worktop with the attached clamps (4 pcs).

Dividing device - the dividing device is suitable for use with a column drill or a milling machine Chuck size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants With a flat lever, it is possible to divide with a lock of 15° The table is locked in a given position with a round lever.

Parting device with universal 3-jaw 360° chuck Diameter of the chuck: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants The package comes with inner and outer jaws