VCGT

VCGT 160404-AS IC20 Turning Tips Radius 0,4mm Coating: non-coated - polished surface IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. No .: 5540005

VCGT 110304-AS IC20 Turning Tips Radius 0,4mm Coating: non-coated - polished surface IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. No .: 5540016

VCGT 110302-AS IC20 Turning Tips IC920 Series: High resistance to chipping, high wear resistance. Suitable for machining malleable cast iron at medium cutting speeds. Usage: Cast iron: K05-K20 Non-ferrous metals and plastics: N05-N25 Types of AS: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. No .: 5592544

Lathe insert VBD VCGT 110302 - AL H01 Radius: 0,2mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.02-0.3 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD VCGT 110304 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.02-0.3 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD VCGT 160404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.02-0.3 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VGT 160402F-AL HF7 Lathe Radius 0.2 Application: Non-Ferrous Metals: N10-N30 Order number: 80004816

Turning insert VCGT 110202 E-SF3 Radius 0.2 Material: T6310 , PVD Usage: Ideal for finishing machining of stainless steel, heat-resistant steel, but also non-ferrous metals, cast iron, classic and hardened steel. Steel : P10-P15 Stainless steel : M01-M15 Cast iron : K05-K20 Non-ferrous metals: N05-N20 Refractory steel : S01-S15 Hardened steel : H01 -H15 Order number: 80028429 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.