Universal chucks and acc.
-
Univ. chucks 3 Art.
-
Univ. chucks 4 Art.
-
Univ. chucks 6 Art.
-
Faceplates
-
Power chucks (machine control)
-
Chucks for wood lathes
-
Replacement jaws
-
Spare parts
-
Flanges
-
Retaining rings
-
Solid soft MC jaw for TOS 4-jaw scroll chuck, CSN 243834
Set of soft monobloc soft jaws for TOS Svitavy four-jaw universal Designation : MC Standard: ČSN 243834 The entire jaw is soft - machinable These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!
from 60,74 € with VAT -
Base jaw SM for TOS 3-jaw scroll chuck , CSN 243855
Base jaws / bottom ridges for TOS Svitavy three-jaw universal chuck Standard: ČSN 24 3855 Heat treated - hardened. These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!
from 83,96 € with VAT -
Base jaw SM for TOS 4-jaw scroll chuck , CSN 243855
Base jaws / bottom ridges for TOS Svitavy four-jaw universal chuck Standard: ČSN 24 3855 Heat treated - hardened. These replacement jaws ONLY fit TOS Svitava chucks. If you have a different brand chuck, they won't fit 100%! Before ordering, check the dimensions - see the attached catalog sheet!
Price - On request -
Soft top jaw NC for TOS soft split jaws, CSN 243857
Soft attachments for the basic jaw of SM chucks TOS Svitavy Number of extensions: according to the selected variant Standard: ČSN 243857 / 24 3857 The attachments are soft, workable. The attachments ONLY fit TOS Svitavy soft split jaws. If you have a non-TOS universal chuck, they will not fit 100%.
from 10,93 € with VAT -
Bayonet type flange for universal chuck CSN 243830 / DIN55027
Intermediate flange with short taper with threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping screws for clamping the flange to the spindle are included in the package. Standard: CSN 243830 / DIN55027
from 109,77 € with VAT -
Camlock type flange for universal chuck DIN55029
Intermediate flange with short taper with Camlock threaded studs for universal chuck Flange outer diameter: according to the selected variant Cone size: according to the selected variant * The sizes of the cones are numbered - you can find the diameters in millimeters - see the attached catalog sheet. Side for clamping the chuck: according to the selected variant, if the type of chuck for which the flange is intended is not indicated, it is a semi-finished product. This means that the clamping holes for the chuck and the diameter on which the chuck will rest need to be finished on this flange. Material: Cast steel Clamping pins + pin securing screws are included in the package. Standard: CSN 243830 / DIN55029
from 115,14 € with VAT -
Square key with spring for TOS universal chuck, CSN 243864
Clamping key / handle with a square for TOS Svitavy universal chuck Suitable for a chuck with a diameter of: according to the selected variant Square: according to the selected variant Other dimensions - see attached photo Standard: ČSN 243864
from 10,27 € with VAT