Turned
-
Live center 60° - CSN 243324
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 81,57 € with VAT -
Live center with enlarged head, type VLC, VERTEX
Centering rotary tip with enlarged head Clamping Morse cone: according to the selected variant Other dimensions - see the attached catalog sheet Tip angle: 60° - 90° - see attached catalog sheet Material: alloyed tool steel, HRC 50
from 94,32 € with VAT -
Live center 60° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 98,40 € with VAT -
Live center 90° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 153,11 € with VAT -
Extended live center for NC machines , CSN 243327 , Skoda
The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.
from 151,86 € with VAT -
Extended live center , CSN 243328 , Skoda
Swivel chuck is designed for work on lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3328 Their extended clamping part allows easy access of the tool to the workpiece, which is especially advantageous when machining tools with exchangeable inserts and when working on copying lathes. The design of the tips allows the radial clearance to be adjusted. The tips have a MORSE ČSN 22 0420 clamping shank (DIN 228, ISO 296) without a clamping thread. Swivel tips are supplied lubricated with lithium grease LV 2-3. It is recommended to relubricate tips used in extreme conditions at intervals of 300 operating hours in quantities up to 1 g through the hole in the housing head (blinded by screw S1) and up to 0.5 g through the hole at the end of the taper shank (blinded by screw S2). Disassembly of the rotating tips is not recommended.
from 134,09 € with VAT -
Live center 60° for heavy loads CSN 243325, Skoda
Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 60 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm
from 499,05 € with VAT -
Live center 90° for heavy loads CSN 243325, Skoda
Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 90 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm
from 499,05 € with VAT