Classic

Morse clamping cone Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Morse clamping cone with extended offset tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Morse clamping cone with carbide tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 60 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm

Morse swivel tip for clamping heavy workpieces Morse taper: according to the selected variant Other dimensions and parameters - see description for individual variants Top angle: 90 ° Standard: ČSN 24 3325 Type N: Throw 0.04mm Type E: Throw 0.01mm

Rotary Tip MK 1 60st. , 3 Bearings, Small Body / Tip Bush Angle of Tip: 60 ° Tip Diameter: 16mm Case Diameter (min): 27mm Case Diameter (Max): 32mm Housing Length tip: 31mm (of which 11mm is a cylindrical part) Overall length: 108mm Other dimensions see enclosed photo Max. Circular runout: 0.005 mm Max. load: 20kg Max. speed: 3200 rpm. * Rotation need to be reduced due to workpiece weight - see enclosed chart Material: Alloy steel, HRC 60 Note: : This stem rotates the stem, the body and the 60 ° point are monolith. Ref. No. 5001-001

Replacement tip for Škoda MK2 rotary tip ČSN 243324 Diameter of the tip Dmax: 20mm Diameter of the ground cylindrical part: mm Total length: mm Suitable for Škoda tips with a silver case - for Silver-line type ČSN 243324M.

Replacement tip for Škoda MK3 rotary tip ČSN 243324 Diameter of the tip Dmax: 28mm Diameter of the ground cylindrical part: mm Total length: mm Suitable for Škoda tips with a silver case - for Silver-line type ČSN 243324M.

Replacement tip for Škoda MK3 swivel tip ČSN 243324 Diameter of the tip Dmax: 30mm Diameter of the ground cylindrical part: 25mm Diameter for the thrust bearing: 15mm Diameter for the rear bearing: 5mm Total length: 153mm Suitable for older Škoda tips with a black case. Not suitable for Silver-line ( type ČSN 243324M).