TCGT

Turning insert VBD TCGT 090204 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.02-0.15 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCGT 110204 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.02-0.15 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCGT 16T304 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

TCGX 110204L-WK - suitable replacement for TCGT CERMET < br> 5015 Series: Suitable for finishing operations, high stiffness. Ideal for low carbon alloys, both dry and wet, at low and high engine speeds. Usage: Steel: P01-P20 Cast iron: K01-K10 Terms and conditions - see attached photo WK type: Order no. : 11196625

New Original Interchangeable Insert in Original Pack (10pcs), according to ANSI Standard: TCGT - (1.5) (0.5) F-AL High Positive Cutting Edge with Sharp Cutting Edge Fine after rough turning of aluminum and its alloys Main application area: Machined materials of group N Uncut cut Size: 09 Thickness: 02 (2,38mm) Radius: 02 (0,2mm ) Fabric material: HF7 (uncoated) Usage: Non-ferrous metals (aluminum and copper): N10-N30 Cat. No. 80002943