Size 27
-
Interchangeable insert 08U IR/L 2 TR BMA, Carmex
Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 08U IR/L 2 TR Inserts for cutting trapezoidal threads with a pitch of 2 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request21,55 € with VAT -
Interchangeable insert 16U IR/L 5 TR BMA, Carmex
Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 16U IR/L 5 TR Inserts for cutting trapezoidal threads with a pitch of 5 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request14,16 € with VAT -
Replaceable plate 22U ER/L 7 TR BMA, Carmex
Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded threads 22U ER / L 7 TR Trapezoidal thread cutters with a pitch of 7 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request21,91 € with VAT -
Interchangeable insert 22U IR/L 6 TR BMA, Carmex
Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 6 TR Inserts for cutting trapezoidal threads with a pitch of 6 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request22,47 € with VAT -
Interchangeable insert 22U IR/L 7 TR BMA , Carmex
Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 7 TR Inserts for cutting trapezoidal threads with a pitch of 7 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request22,47 € with VAT -
Interchangeable insert 22U IR/L 8 TR BMA, Carmex
Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 8 TR Inserts for cutting trapezoidal threads with a pitch of 8 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request22,47 € with VAT -
Replaceable plate 27U ER / L 8 TR BMA, Carmex
Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded threads 27U ER / L 8 TR Trapezoidal thread cutters with a pitch of 8 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock34,15 € with VAT -
Replaceable plate 27U ER / L 9 TR BMA, Carmex
Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded threads 27U ER / L 9 TR Trapezoidal thread cutters with a pitch of 9 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock31,05 € with VAT -
Replaceable plate 27U ER / L 10 TR BMA, Carmex
Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded taps 27U ER / L 10 TR Trapezoidal thread cutters with a pitch of 10 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request34,15 € with VAT -
Interchangeable plate 27U IR / L 8 TR BMA, Carmex
Plate for cutting internal knives - for trapezoidal thread Cutter / plate for cutting internal trapezoidal threads 27U IR / L 8 TR Trapezoidal thread cutting blades with a pitch of 8 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock32,57 € with VAT -
Replaceable plate 27U IR / L 9 TR BMA, Carmex
Plate for cutting internal knives - for trapezoidal thread Cutter / plate for cutting internal trapezoidal threads 27U IR / L 9 TR Trapezoidal thread cutting blades with 9 mm pitch < br> Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock29,98 € with VAT -
Replaceable plate 27U IR / L 10 TR BMA(1br), Carmex
Single-sided insert for internal trapezoids - for trapezoidal thread Cutter / insert for cutting internal trapezoidal threads — 27U IR / L 10 TR This plate has only one run !!! , fits only in 27U holders Sheets for cutting trapezoidal threads with a pitch of 10 mm Coating: PVD TiALN Sheet material: BMA - universal use , suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Use: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat resistant steel(Ni, Co, Fe, Ti) Hardened steel A… Ëo For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock29,98 € with VAT