Shape D

Turning insert for hardened steel, replaceable insert, insert DCGW 070204 HRC55 Suitable for holders for DCMT / DCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert DCGW 11T304 HRC55 Suitable for holders for DCMT / DCGT inserts. Radius: 0,4mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Blade DNMG 150608 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308095

Turning insert VBD DNMG 110408 PP IC830 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DNMG 110404 NF IC830 Radius 0,4mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type NF: Suitable for routine and finishing operations. Catalog number 03308123 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DCMT 070202 - PF IC830 Radius 0,2mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Ord. Ä. : 3308131 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DNMG 110408 NF IC830 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type NF: Suitable for routine and finishing operations. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DCMT 070202 IC830 Radius 0,2mm Coating: PVD, AlTiN TiN A IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type: Suitable for routine machining and finishing operations Cat. Ä. : 3308161 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Blade DNMG 150412 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308180

DNMS 150408 - 12 IC20 Radius 0,8mm Coating: uncoated IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Standard conditions - see attached photo Typ 12: Single-sided 80 ° plate with very sharp cutting edge for machining soft non-ferrous materials. Kat. No. 5500519

DNMG 110408 - PP IC10 Radius: 0,8mm Coating: uncoated IC10 Series: < br> Suitable for aluminum and non-ferrous materials. Usage: Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superslitz: S10-S30 Terms and Conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5502833

Home Turning inserts inserts DCMT 11T308 IC520N radius 0.8 mm Coating: CERMET PVD TiCN TiN IC520N Series: < Suitable for high-speed machining, conventional and finishing operations with a very smooth surface. Wear-resistant, the blade prevents material from sticking to the cutting edge. Use: Home Steel: P05-P25 Home Stainless steel: M05-M15 cutting conditions - see attached photo Type: Suitable for general machining and finishing operations Kat. No .: 5503780