Morse
-
Drill chuck arbour with tang and thread ČSN 241329
Taper thread drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Thread for the header: according to the selected variant Standard: replacement ČSN 241329 / CSN 24 1329 Use: for clamping a drill chuck, it can also be used to clamp something else.
from 6,44 € with VAT -
Milling arbor for drill chuck with taper
Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.
from 6,03 € with VAT -
Milling arbor for drill chuck with thread
Taper milling mandrel for drill chuck (mandrel to chuck), type with internal thread in Morse taper and external thread for chuck clamping Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Thread for the header: according to the selected variant Clamping of a drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper. Use: for clamping a drill chuck, it can also be used to clamp something else.
from 7,90 € with VAT -
Mandrel for drill chuck B16 / R8, VJ-124-B16
Drill chuck for cone chuck B16 Diameter of chuck part is 24mm. Taper Cone: R8 Internal Thread: 7/16 "-20 UNF Overall Length: 134mm Cone Length B16: 24mm Cylinder Stopper with 73mm Groove < br> Suitable for American BridgePort machines
In stock15,68 € with VAT -
Drill chuck 0.5 - 6.5 mm with taper J1 with handle, 10003
Metal drill head type 6H with a handle and ground jaws, up to a drill diameter of 6.5mm Ground jaws For clamping the drill: 0.5-6.5mm, taper JT1 ( it is an American taper Jacobs Taper 1 !!!) Body diameter: 32mm, total head height 40/50mm Handle: type T2 Fits Vertex thread cutters - types K1-1/2 and K1-MT2 Cat. number: 3303-062
In stock17,55 € with VAT -
Drill chuck 0.3 - 4 mm with JT0 taper with handle
Metal drill head with handle and cut jaws, up to a diameter of 4mm drill bit Cutting jaws For drilling: 0,3-4mm, JT0 cone (this is a Jacobs Taper 0 !!!) > For the chuck, we have morse 1 and morse 2 - see related products. Body Diameter: 22mm, Overall Head Height 29 / 36mm Hole Diameter for Loop: 3mm CSN 241320 / CSN 24 1320
On request12,27 € with VAT -
Drill chuck 0.3 - 4 mm with cone JT0 with mandrel handle MK1
Metal drill head with handle and cut jaws, up to 4mm drill bit Cutting jaws Chuck precision: 0,18mm Drill bits: 0,3-4mm, cone JT0 thorn MK1 Supplied with MK1 thorn Body Diameter: 22mm, Overall Head Height 29 / 36mm Hole Diameter for Loop: 3mm CSN 241320 / CSN 24 1320
On request17,61 € with VAT -
Drill chuck 0.3 - 4 mm with JT0 taper with MK2 mandrel handle
Metal drill head with handle and cut jaws, up to 4mm drill bit Cutting jaws Chuck precision: 0,18mm Drill bits: 0,3-4mm, cone JT0 thorn MK2 - Supplied with MK2 thorn Body Diameter: 22mm, total head height 29 / 36mm Diameter hole for loop: 3mm CSN 241320 / CSN 24 1320
On request17,61 € with VAT