Milling supports
-
Milling support for lathe 70x150mm for MN80
Milling support for lathe Clamping surface 70x150mm Axial displacement about 80mm 1 piece nonius 0,02mm, 1x turn = 1mm Slot: 3xT10 Distance from rear edge to axis hole: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking base Adjustable axial clearance of the bolt bearing The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped Material: Angle holder and T-slot table is made of CG25 gray cast iron Nonius, crank and fastener is made of steel Feed screw is made of strong steel < br> Usage: MN80 lathe, or even for other lathes. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
In stock514,87 € with VAT