Milling support for lathe 70x150mm for MN80
Current price:
511,60 €
with VAT
422,81 € without VAT
In stock
(5x)
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000146905
- Brand:
- Česká výroba 201x
- Warranty:
- 24 months
- Code:
- MN80-FS
Product information
Milling support for lathe
Clamping surface 70x150mm
Axial displacement about 80mm
1 piece nonius 0,02mm, 1x turn = 1mm
Slot: 3xT10
Distance from rear edge to axis hole: 32.8mm, hole 10mm
Bronze nut
Adjustable support for the base of the locking base
Adjustable axial clearance of the bolt bearing
The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped
Material:
Angle holder and T-slot table is made of CG25 gray cast iron
Nonius, crank and fastener is made of steel
Feed screw is made of strong steel
< br> Usage: MN80 lathe, or even for other lathes.
a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course.
The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
Clamping surface 70x150mm
Axial displacement about 80mm
1 piece nonius 0,02mm, 1x turn = 1mm
Slot: 3xT10
Distance from rear edge to axis hole: 32.8mm, hole 10mm
Bronze nut
Adjustable support for the base of the locking base
Adjustable axial clearance of the bolt bearing
The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped
Material:
Angle holder and T-slot table is made of CG25 gray cast iron
Nonius, crank and fastener is made of steel
Feed screw is made of strong steel
< br> Usage: MN80 lathe, or even for other lathes.
a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course.
The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"vše bez problému a rychle"
"vše v pořádku, rychlé dodání a slušná cena"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!