Magnet. clamps, demagnetizers
-
Permanent magnets
-
Vakuové upínače
-
Electromagnets
-
Sine. tables magnet., tilting
-
Load magnets - lifting
-
Lamellar blocks
-
Demagnetizers, demagnetizers
-
Magnetic collectors
-
Angle magnets for welding
-
Control unit for electromagnet 2500W IP54, type EM-CU
Control units are used for power supply and safe control of electromagnetic clamps. They enable adjustment of the clamping force and automatic demagnetization of both the magnet and the workpieces. Each unit is equipped with a safety contact that blocks the start of the machine if the clamp is not on or sufficiently magnetized. We supply the units in a metal case as standard, optionally they can also be supplied as a control panel for direct assembly into the control unit of the (IP00) machine. Used to power and control 110 VDC electromagnetic clamps. Power supply 200-230V, or we can supply 380-460V or 110V, 50/60Hz. Advantages: - Operator safety - the machine will not start at low clamping force - Variable clamping force - control of clamping force for greater precision and cooler operation - Demagnetization of both the clamp and the workpiece for easy removal - They enable remote control of the clamps - The possibility of controlling up to 4 magnets simultaneously Important parameters: - The possibility of continuous adjustment clamping forces - Possibility of connection with the PLC of the machine - Control using the cable remote control U19 - see the attached photo - Networking support - connection of several control units and clamps in large assemblies - Current transformer for checking the magnetization of current - Power voltage control - IEC standard in accordance with the European Machinery Regulation 2006/42/EC - Extension of the control panel for installation in the machine - Safety contact - at low clamping force the machine does not turn on Functions: Control units of electromagnetic clamps js ou an essential part of them, becaus
On request1.962,46 € with VAT -
Load magnet ZM 1500F - 1500kg
The new ZM blade attachment line offers an innovative clamping eye and, thanks to the neodymium magnet used, more than 60 times the force, against its own weight. Neodymium magnet (PrNd) Suitable for clamping straight metal objects and spindles. Flat products: max. weight 1500 kg, minimum material thickness: 45mm, maximum length 2500mm Complies with the following specifications: EN 292/1, EN 292/2, 98/37 / CE, UNI 7690, 89/392 CEE. Load magnets are delivered in carrying capacity of 100kg, 300kg, 500kg, 600kg, 1000kg and 1500kg with fixed or swinging eye.
In stock771,24 € with VAT -
Lamellar block for magnetic clamps 1240x297x24, Czech production
Lamella magnetic block, pole plate Suitable for permanent magnets and electromagnets. Length: 1240mm Width: 297mm Height: 24mm Slat width: 4 25 4 19 4mm Slat blocks and additional pole plates are used as accessories for rectangular or circular clamps, which greatly increase their usability. This accessory can sit on the fixture freely or is secured mechanically. Thus, the standard clamp can be adapted to clamp an irregularly shaped part without the need to machine the surface of the clamp. These auxiliary tools can be modified to suit each workpiece without limiting the functionality of the machine and fixture. Lamellar blocks and additional pole plates are not magnetic in themselves, but only conduct the magnetic flux. They are composed of fine steel lamellas, divided by brass lamellas, everything is soldered with silver. We supply lamella blocks for both circular and rectangular clamps. They can be installed freely or mechanically using screws or pins. They expand the possibilities of using the clamp by clamping uneven or non-uniform material. Advantages: - The possibility of machining to the desired shape to adapt to different components - The possibility of transverse and longitudinal polarization - They can be used to soften the magnetic field clamps for clamping even otherwise too small or thin workpieces - They can also be used as a lateral support in the case of grinding workpieces with a small overall contact surface with the clamp ( e.g. hollow thin-walled profiles) The pole plate comes from from excess stock, is unused.
In stock1.101,78 € with VAT -
Angle magnet, magnetic clamp 95x65x14mm 45 / 18kg - angles 30°, 45°, 75°, 60°, 90°
Welding magnet, practical aid, clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at 30, 45, 60, 75 and 90 degrees angles. Dimensions (Maximum Dimension): Height: 65mm Width: 95mm Thickness: 14mm
In stock2,94 € with VAT -
Angle magnet, magnetic clamp 145x87x16mm 70 / 40kg - angles 90°, 135°, 45°
Welding magnet, practical aid, clamp for easy metal holding in welding, drilling, riveting, - angles Allows to hold material at angles: 45st. , 90th. , 135th. Dimensions (Maximum Dimension): Height: 87mm Width: 145mm Thickness: 16mm
In stock6,56 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 60x48x52mm, VCP-2A
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm - plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.
In stock32,49 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x100mm, VCP-3A
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 100mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.
In stock39,88 € with VAT -
Set of lamella blocks(3pcs) for magnetic clamps, VCP-B
Laminate block set contains: 2pcs: Laminated magnetic block 50x25x100mm 1pcs: Laminated prism magnetic block 60x48x100mm Spacer pitch: 2,5 3mm Appropriate for permanent magnets and electromagnets. Blocking blocks allow for an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.
In stock77,94 € with VAT -
Universal magnetic blocks 64x143x71mm, WBM500
Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 143mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM500
On requestPrice - On request