Permanent magnets

  • Permanent magnetic chuck 250x250 mm for rough milling and drilling

    Permanent magnetic chuck 250x250 mm for rough milling and drilling

    Permanent magnet 250 x 250 mm for rough milling, drilling and grinding. Magnet width: 253mm Magnet length: 252mm Magnet height: 90mm Number of magnetic blocks: 90 Size mag. block: 18x18mm Pressure of one mag. block: 25kgf(245,16N) Total pressure: 2250kgf(22065N) Pole width(resin): 3,5mm Minimum workpiece height: 6mm The pressure is reduced if the clamped surface is uneven(air gap 100-50 %) or contains cast iron(80-50 %).

    In stock
    762,43 € with VAT
  • Permanent magnetic chuck 300x400 mm for rough milling and drilling

    Permanent magnetic chuck 300x400 mm for rough milling and drilling

    Permanent magnet 300 x 400 mm for rough milling, drilling and grinding. Magnet width: 300mm Magnet length: 400mm Magnet height: 90mm Number of magnetic blocks: 176 Size mag. block: 18x18mm Pressure of one mag. block: 25kgf(245,16N) Total pressure: 4400kgf(43148N) Pole width(resin): 3,5mm Minimum workpiece height: 6mm The pressure is reduced if the clamped surface is uneven(air gap 100-50 %) or contains cast iron(80-50 %).

    In stock
    1.199,86 € with VAT
  • Permanent magnetic plate 200mm, Alustar

    Permanent magnetic plate 200mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 200mm Magnet height: 79mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, which

    On request
    2.169,09 € with VAT
  • Permanent magnetic plate 250mm, Alustar

    Permanent magnetic plate 250mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 250mm Magnet height: 79mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, which

    On request
    2.376,37 € with VAT
  • Permanent magnetic plate 300mm, Alustar

    Permanent magnetic plate 300mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 300mm Magnet height: 82mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, which

    On request
    2.686,39 € with VAT
  • Permanent magnetic plate 350mm, Alustar

    Permanent magnetic plate 350mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 350mm Magnet height: 82mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, which

    On request
    3.418,77 € with VAT
  • Permanent magnetic plate 400mm, Alustar

    Permanent magnetic plate 400mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 400mm Magnet height: 84mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, which

    On request
    4.641,49 € with VAT
  • Permanent magnetic plate 500mm, Alustar

    Permanent magnetic plate 500mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 500mm Magnet height: 109mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, whic

    On request
    5.903,23 € with VAT
  • Permanent magnetic plate 600mm, Alustar

    Permanent magnetic plate 600mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 600mm Magnet height: 109mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, whic

    On request
    8.367,45 € with VAT
  • Permanent magnetic plate 700mm, Alustar

    Permanent magnetic plate 700mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 700mm Magnet height: 120mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, whic

    On request
    10.474,91 € with VAT
  • Permanent magnetic plate 800mm, Alustar

    Permanent magnetic plate 800mm, Alustar

    The Alustar permanent neodymium magnet is a lightweight version of the Neostar chuck - for clamping workpieces during turning and round grinding. The clamp stands out due to the aluminum construction of the body and low weight. It handles a larger weight range of machined components. The radial pole plate allows you to easily and efficiently machine the face, inside and outside diameters of a workpiece in one operation - without having to unclip and re-clamp the workpiece. The possibility of continuous regulation of the clamping force facilitates centering. Magnet diameter: 800mm Magnet height: 120mm Other dimensions - see attached data sheet. Nominal clamping force: 140N / cm2 Minimum workpiece diameter: 40mm Magnet regrinding limit: 5 mm High-performance double neodymium magnetic system, aluminum base. Unique design with a screw self-locking switching mechanism for continuous adjustment of the clamping force, which facilitates the centering of the workpiece. The aluminum base reduces the load on the machine tool spindle and increases the possible weight capacity of the workpieces. Very safe, self-locking mechanism that prevents the chuck from turning off during machining. Countersinks and threads from the underside of the base for clamping on a suitable flange. You can also choose to modify the magnet - custom-made center drilling, additional pole plate, pole plate with T-slots or a set of pole pieces. Application: turning, round grinding The clamp is equipped with high-quality permanent neodymium magnets, we provide a full warranty and post-warranty service for the magnets. The big advantage of the clamp is the patented switching mechanism, whic

    On request
    14.582,58 € with VAT
  • Permanent magnetic chuck 150x300 mm for rough milling and drilling

    Permanent magnetic chuck 150x300 mm for rough milling and drilling

    Permanent magnet 150 x 350 mm for rough milling, drilling and grinding, CNC machining centers, engraving, etc. Magnet width: 150mm Magnet length: 300mm Magnet height: 55mm Number of magnetic blocks: 116 Size mag. block: 12x12mm Pressure of one mag. block: 15kgf(147,10N) Total pressure: 1750kgf(17162N) Pole width(resin): 3,5mm Minimum workpiece height: 2mm The pressure is reduced if the clamped surface is uneven(air gap 100-50 %) or contains cast iron(80-50 %).

    In stock
    512,46 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Permanent magnets