Lathe knives and inserts
-
With soldered wafer (classic)
-
Knives with replaceable plate
-
Plates
-
Mini holders and mini tools
-
Forged HSS knives
-
RADECO knife blanks
-
GRECO sharpened shaped knives
-
Forming knives and wheels
-
Ball turning
-
Lathe turning insert holder SDJCL
Recommended ✓Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
from 32,63 € with VAT -
Lathe turning insert holder SVHCL , AKKO
Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
36,77 € with VAT -
Lathe turning insert holder SVJBL
Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
36,13 € with VAT -
Lathe turning insert holder SDNCN
Front holder for exchangeable inserts / knife for external turning, fastening with a screw Clamping dimensions: according to the selected variant Marking of plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.
32,63 € with VAT -
Lathe turning insert holder SRDCN
Front holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
from 32,63 € with VAT -
Lathe turning insert holder SVVBN
Front holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
from 29,05 € with VAT -
Front turning knife for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby face turning knife mm with replaceable insert and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 10,64 € with VAT -
Turning knife right for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby right turning knife mm with exchange plate and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 12,63 € with VAT -
Left-hand turning knife for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby left-hand turning knife mm with replaceable insert and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 12,63 € with VAT -
Turning knife left-sided straight DIN 4971 L / CSN 223711
Clearance saleTurning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223711 / CSN 22 3711, DIN4971, DIN4971L, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 2,25 € with VAT -
Turning knife left-sided straight DIN 4971 L / CSN 223711 , DENAS
Turning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223711 / CSN 22 3711, DIN4971, DIN4971L, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 4,71 € with VAT -
Turning knife right-sided DIN 4972 R / CSN 223712
Clearance saleTurning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 3,41 € with VAT