Lamellar blocks

Lamellar prism - magnetic block, induction prismatic cube with switch Suitable for permanent magnets and electromagnets. Width: 150mm Height: 150mm Length: 150mm Prism width: 32mm Clamping force prisms: 50kg Clamping base force: 140kg Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to a classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-531

Lamella magnetic block, pole plate Suitable for permanent magnets and electromagnets. Length: 1240mm Width: 297mm Height: 24mm Slat width: 4 25 4 19 4mm Slat blocks and additional pole plates are used as accessories for rectangular or circular clamps, which greatly increase their usability. This accessory can sit on the fixture freely or is secured mechanically. Thus, the standard clamp can be adapted to clamp an irregularly shaped part without the need to machine the surface of the clamp. These auxiliary tools can be modified to suit each workpiece without limiting the functionality of the machine and fixture. Lamellar blocks and additional pole plates are not magnetic in themselves, but only conduct the magnetic flux. They are composed of fine steel lamellas, divided by brass lamellas, everything is soldered with silver. We supply lamella blocks for both circular and rectangular clamps. They can be installed freely or mechanically using screws or pins. They expand the possibilities of using the clamp by clamping uneven or non-uniform material. Advantages: - The possibility of machining to the desired shape to adapt to different components - The possibility of transverse and longitudinal polarization - They can be used to soften the magnetic field clamps for clamping even otherwise too small or thin workpieces - They can also be used as a lateral support in the case of grinding workpieces with a small overall contact surface with the clamp ( e.g. hollow thin-walled profiles) The pole plate comes from from excess stock, is unused.

Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm - plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.

Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 100mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.

Laminate block set contains: 2pcs: Laminated magnetic block 50x25x100mm 1pcs: Laminated prism magnetic block 60x48x100mm Spacer pitch: 2,5 3mm Appropriate for permanent magnets and electromagnets. Blocking blocks allow for an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.